Nakamura, T.

Paper	Title	Page
THPLT068	Transverse Bunch-by-bunch Feedback System for the SPring-8 Storage Ring	2646
	T. Nakamura, S. Daté, T. Ohshima JASRI/SPring-8, Hyogo K. Kobayashi SES, Hyogo-pref.
	A transverse bunch-by-bunch feedback system is developed for the SPring-8 storage ring. An analog de-multiplexer is developed to slice out every six-bunch signal for high-resolution 12-bit ADCs of clock frequency 85MHz, one-sixth of 508MHz RF frequency. Six commercial ADC-FPGA-DAC boards are used for processing the signal from the de-multiplexer. A custom FPGA board is used to multiplex the output signals from those boards. The feedback system is installed in the ring and working with the damping time of 0.5~2.5ms in 30kHz-254MHz and can suppress multi-bunch instabilities driven by impedances of resistive-wall of in-vacuum insertion devices and cavity HOMs at low chromaticity operation.
THOACH03	Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source	222
	H. Tanaka, T. Aoki, T. Asaka, S. Daté, K. Fukami, Y. Furukawa, H. Hanaki, N. Hosoda, T. Kobayashi, N. Kumagai, M. Masaki, T. Masuda, S. Matsui, A. Mizuno, T. Nakamura, T. Nakatani, T. Noda, T. Ohata, H. Ohkuma, T. Ohshima, M. Oishi, S. Sasaki, J. Schimizu, M. Shoji, K. Soutome, M. Suzuki, S. Suzuki, S. Takano, M. Takao, T. Takashima, H. Takebe, K. Tamura, R. Tanaka, T. Taniuchi, Y. Taniuchi, K. Tsumaki, A. Yamashita, K. Yanagida, H. Yonehara, T. Yorita JASRI/SPring-8, Hyogo M. Adachi, K. Kobayashi, M. Yoshioka SES, Hyogo-pref.
	Top-up operation maximizes research activities in a light source facility by an infinite beam lifetime and photon beam stability. We have been improving the SPring-8 accelerators to achieve the ideal top-up operation. For the perturbation-free injection, we adjusted the magnetic field shape of four bump magnets to close the bump orbit, and introduced a scheme to suppress the stored beam oscillation induced by the nonlinearlity of sextupole magnets. These reduced the horizontal oscillation down to a third of the stored beam size. For the loss-free injection, beam collimators were installed upstream of the injection line. This realized the injection efficiency of ~100% under the restricted gap condition of in-vacuum insertion devices (ID). Since autumn 2003, we have been injecting the beams keeping the photon beam shutters opened and ID gaps closed. We developed a bunch-by-bunch feedback system to reduce the beam loss further with all the ID gaps fully closed by lowering the operating chromaticity. The operation with constant stored current is scheduled in June 2004. We present the overview and progress of the SPring-8 top-up operation focusing on our developments and results.
	Video of talk
	Transparencies
MOPLT067	KEKB Performance	707
	Y. Funakoshi, K. Akai, K. Ebihara, K. Egawa, A. Enomoto, J. Flanagan, H. Fukuma, K.  Furukawa, T. Furuya, J. Haba, S. Hiramatsu, T. Ieiri, N. Iida, H. Ikeda, T. Kageyama, S. Kamada, T. Kamitani, S. Kato, M. Kikuchi, E. Kikutani, H. Koiso, M. Masuzawa, T. Mimashi, A. Morita, T. Nakamura, H. Nakayama, Y. Ogawa, K. Ohmi, Y. Ohnishi, N. Ohuchi, K. Oide, M. Shimada, S. Stanic, M. Suetake, Y. Suetsugu, T. Sugimura, T. Suwada, M. Tawada, M. Tejima, M. Tobiyama, S. Uehara, S. Uno, S.S. Win, N. Yamamoto, Y. Yamamoto, Y. Yano, K. Yokoyama, M. Yoshida, M. Yoshida, S.I. Yoshimoto KEK, Ibaraki F. Zimmermann CERN, Geneva
	The KEKB B-Factory is an electron-positron double ring collider working at KEK. Its peak luminosity surpassed 1034 /cm2/sec in May 2003 for the first time in the history of colliders. In this report, we summarize the history of KEKB with an emphasis of recent progress.