IPAC2014 - List of Authors (Ros, M.)

Paper	Title	Page
MOPRO054	Commissioning progress of the Femto-slicing Project at SOLEIL	206
	M. Labat, H.B. Abualrob, P. Betinelli-Deck, A. Buteau, N. Béchu, L. Cassinari, M.-E. Couprie, F. Dohou, C. Herbeaux, Ph. Hollander, J.-F. Lamarre, C. Laulhé, A. Lestrade, J. Lüning, O. Marcouillé, J.L. Marlats, T. Moreno, P. Morin, A. Nadji, L.S. Nadolski, D. Pédeau, P. Prigent, S. Ravy, J.P. Ricaud, M. Ros, P. Roy, M.G. Silly, F. Sirotti, K. Tavakoli, M.-A. Tordeux, D. Zerbib SOLEIL, Gif-sur-Yvette, France
	The femtoslicing project at SOLEIL is currently under commissioning. It will enable to serve several beamlines with 100 fs FWHM long pulses of soft and hard X-rays with reasonable flux and with a 1 kHz repetition rate. It is based on the interaction of a femtosecond Ti:Sa laser with electrons circulating in the magnetic field of a modulator wiggler, that provides the electron beam energy modulation on the length scale of the laser pulse. The optimization of the interaction is performed using two dedicated diagnostics stations. The first one, operating in the Infra-Red (IR) is installed in the tunnel and allows the adjustment of the temporal, spectral and spatial overlap between the laser and the electron beam. The second one, located in the IR-THz AILES beamline, measures the intensity of the terahertz (THz) radiation emitted by the local dip structure produced in the core electron beam after interaction. This second setup provides refined optimization of the interaction. This paper describes the layout of these diagnostics and gives first results and characterization of the slicing experiment at SOLEIL.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO054
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO052	The ThomX Project Status	2062
	A. Variola, D. Auguste, A. Blin, J. Bonis, S. Bouaziz, C. Bruni, K. Cassou, I. Chaikovska, S. Chancé, V. Chaumat, R. Chiche, P. Cornebise, O. Dalifard, N. Delerue, T. Demma, I.V. Drebot, K. Dupraz, N. El Kamchi, M. El Khaldi, P. Gauron, A. Gonnin, E. Guerard, J. Haissinski, M. Jacquet, D. Jehanno, M. Jouvin, E. Jules, F. Labaye, M. Lacroix, M. Langlet, D. Le Guidec, P. Lepercq, R. Marie, J.C. Marrucho, A. Martens, B. Mercier, E. Mistretta, H. Monard, Y. Peinaud, A. Pérus, B. Pieyre, E. Plaige, C. Prevost, T. Roulet, R. Roux, V. Soskov, A. Stocchi, C. Vallerand, A. Vermes, F. Wicek, Y. Yan, J.F. Zhang, Z.F. Zomer LAL, Orsay, France P. Alexandre, C. Benabderrahmane, F. Bouvet, L. Cassinari, M.-E. Couprie, P. Deblay, Y. Dietrich, M. Diop, M.E. El Ajjouri, M.P. Gacoin, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, R. Lopes, A. Loulergue, P. Marchand, F. Marteau, D. Muller, A. Nadji, R. Nagaoka, J.-P. Pollina, F. Ribeiro, M. Ros, R. Sreedharan SOLEIL, Gif-sur-Yvette, France A. Bravin, G. Le Duc, J. Susini ESRF, Grenoble, France C. Bruyère, A. Cobessi, W. Del Net, J.L. Hazemann, J.L. Hodeau, P. Jeantet, J. Lacipière, O. Proux Institut NEEL, Grenoble, France E. Cormier, J. Lhermite CELIA, Talence, France L. De Viguerie, H. Rousselière, P. Walter LAMS, Universite Pierre et Marie Curie, Ivry Sur Seine, France H. Elleaume, F. Esteve INSERM, Grenoble Institut des Neurosciences, La Tronche, France J.M. Horodinsky, N. Pauwels, P. Robert CNRS (IRSD), Orsay, France S. Sierra TED, Velizy, France
	Funding: Work supported by the French Agence Nationale de la Recherche as part of the program EQUIPEX under reference ANR-10-EQPX-51, the Ile de France region, CNRS-IN2P3 and Université Paris Sud XI A collaboration of seven research institutes and an industry has been set up for the ThomX project, a compact Compton Backscattering Source (CBS) based in Orsay – France. After a period of study and definition of the machine performances a complete description of all the systems has been provided. The infrastructures work is started and the main systems are in the call for tender phase. In this paper we will illustrate the definitive machine parameters and components characteristics. We will also update the results of the different ongoing R&D on optical resonators, fast power supplies for the injection kickers and on the electron gun.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO052
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Commissioning progress of the Femto-slicing Project at SOLEIL

206

M. Labat, H.B. Abualrob, P. Betinelli-Deck, A. Buteau, N. Béchu, L. Cassinari, M.-E. Couprie, F. Dohou, C. Herbeaux, Ph. Hollander, J.-F. Lamarre, C. Laulhé, A. Lestrade, J. Lüning, O. Marcouillé, J.L. Marlats, T. Moreno, P. Morin, A. Nadji, L.S. Nadolski, D. Pédeau, P. Prigent, S. Ravy, J.P. Ricaud, M. Ros, P. Roy, M.G. Silly, F. Sirotti, K. Tavakoli, M.-A. Tordeux, D. Zerbib
SOLEIL, Gif-sur-Yvette, France

The femtoslicing project at SOLEIL is currently under commissioning. It will enable to serve several beamlines with 100 fs FWHM long pulses of soft and hard X-rays with reasonable flux and with a 1 kHz repetition rate. It is based on the interaction of a femtosecond Ti:Sa laser with electrons circulating in the magnetic field of a modulator wiggler, that provides the electron beam energy modulation on the length scale of the laser pulse. The optimization of the interaction is performed using two dedicated diagnostics stations. The first one, operating in the Infra-Red (IR) is installed in the tunnel and allows the adjustment of the temporal, spectral and spatial overlap between the laser and the electron beam. The second one, located in the IR-THz AILES beamline, measures the intensity of the terahertz (THz) radiation emitted by the local dip structure produced in the core electron beam after interaction. This second setup provides refined optimization of the interaction. This paper describes the layout of these diagnostics and gives first results and characterization of the slicing experiment at SOLEIL.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO054

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO052

The ThomX Project Status

2062

A. Variola, D. Auguste, A. Blin, J. Bonis, S. Bouaziz, C. Bruni, K. Cassou, I. Chaikovska, S. Chancé, V. Chaumat, R. Chiche, P. Cornebise, O. Dalifard, N. Delerue, T. Demma, I.V. Drebot, K. Dupraz, N. El Kamchi, M. El Khaldi, P. Gauron, A. Gonnin, E. Guerard, J. Haissinski, M. Jacquet, D. Jehanno, M. Jouvin, E. Jules, F. Labaye, M. Lacroix, M. Langlet, D. Le Guidec, P. Lepercq, R. Marie, J.C. Marrucho, A. Martens, B. Mercier, E. Mistretta, H. Monard, Y. Peinaud, A. Pérus, B. Pieyre, E. Plaige, C. Prevost, T. Roulet, R. Roux, V. Soskov, A. Stocchi, C. Vallerand, A. Vermes, F. Wicek, Y. Yan, J.F. Zhang, Z.F. Zomer
LAL, Orsay, France
P. Alexandre, C. Benabderrahmane, F. Bouvet, L. Cassinari, M.-E. Couprie, P. Deblay, Y. Dietrich, M. Diop, M.E. El Ajjouri, M.P. Gacoin, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, R. Lopes, A. Loulergue, P. Marchand, F. Marteau, D. Muller, A. Nadji, R. Nagaoka, J.-P. Pollina, F. Ribeiro, M. Ros, R. Sreedharan
SOLEIL, Gif-sur-Yvette, France
A. Bravin, G. Le Duc, J. Susini
ESRF, Grenoble, France
C. Bruyère, A. Cobessi, W. Del Net, J.L. Hazemann, J.L. Hodeau, P. Jeantet, J. Lacipière, O. Proux
Institut NEEL, Grenoble, France
E. Cormier, J. Lhermite
CELIA, Talence, France
L. De Viguerie, H. Rousselière, P. Walter
LAMS, Universite Pierre et Marie Curie, Ivry Sur Seine, France
H. Elleaume, F. Esteve
INSERM, Grenoble Institut des Neurosciences, La Tronche, France
J.M. Horodinsky, N. Pauwels, P. Robert
CNRS (IRSD), Orsay, France
S. Sierra
TED, Velizy, France

Funding: Work supported by the French Agence Nationale de la Recherche as part of the program EQUIPEX under reference ANR-10-EQPX-51, the Ile de France region, CNRS-IN2P3 and Université Paris Sud XI
A collaboration of seven research institutes and an industry has been set up for the ThomX project, a compact Compton Backscattering Source (CBS) based in Orsay – France. After a period of study and definition of the machine performances a complete description of all the systems has been provided. The infrastructures work is started and the main systems are in the call for tender phase. In this paper we will illustrate the definitive machine parameters and components characteristics. We will also update the results of the different ongoing R&D on optical resonators, fast power supplies for the injection kickers and on the electron gun.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO052

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)