JACoW is a publisher in Geneva, Switzerland that publishes the proceedings of accelerator conferences held around the world by an international collaboration of editors.
@inproceedings{grewe:srf2023-mopmb008,
author = {R. Grewe and M. Arnold and A. Brauch and M. Dutine and L.E. Jürgensen and N. Pietralla and F. Schließmann and D. Schneider},
% author = {R. Grewe and M. Arnold and A. Brauch and M. Dutine and L.E. Jürgensen and N. Pietralla and others},
% author = {R. Grewe and others},
title = {{In-Situ Quality Factor Measurements of SRF Cavities at S-DALINAC}},
% booktitle = {Proc. SRF'23},
booktitle = {Proc. 21th Int. Conf. RF Supercond. (SRF'23)},
pages = {70--74},
eid = {MOPMB008},
language = {english},
keywords = {cavity, linac, SRF, coupling, resonance},
venue = {Grand Rapids, MI, USA},
series = {International Conference on RF Superconductivity},
number = {21},
publisher = {JACoW Publishing, Geneva, Switzerland},
month = {09},
year = {2023},
issn = {2673-5504},
isbn = {978-3-95450-234-9},
doi = {10.18429/JACoW-SRF2023-MOPMB008},
url = {https://jacow.org/srf2023/papers/mopmb008.pdf},
abstract = {{The Superconducting Darmstadt Linear Accelerator (S-DALINAC) is a thrice recirculating electron accelerator wich can be operated in a multi-turn energy recovery mode*. The design parameters for kinetic energy and beam current are up to 130 MeV and up to 20 uA respectively. The injector consists of a six-cell capture cavity and two 20-cell srf cavities. The main linac consists of eight 20-cell cavities. The cavities are operated at a temperature of 2 K with a frequency of 2.9972(1) GHz. Monitoring of the srf cavities is important for the overall performance of the accelerator. A key parameter for the rating of the srf cavity performance is the intrinsic quality factor Q. At the S-DALINAC it is measured for selected cavities during the yearly maintenance procedures. The unique design of the rf input coupler allows for a wide tuning range for the input coupling strength. This makes in-situ quality factor measurements using the decay time measurement method** possible. The contribution illustrates the principal design of the input couplers and the benefits it yields for Q measurements. Recent results including the progression of the quality factors over time will be presented.}},
}