RuPAC2021 - List of Keywords (cryomodule)

Paper	Title	Other Keywords	Page
MOPSA16	Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators	cavity, vacuum, experiment, cryogenics	165
	D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich INP BSU, Minsk, Belarus A.V. Butenko, D. Nikiforov, E. Syresin JINR, Dubna, Moscow Region, Russia M. Gusarova, M.V. Lalayan, S.M. Polozov MEPhI, Moscow, Russia V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
	Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16
About •	Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPSA16

Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators

cavity, vacuum, experiment, cryogenics

165

D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich
INP BSU, Minsk, Belarus
A.V. Butenko, D. Nikiforov, E. Syresin
JINR, Dubna, Moscow Region, Russia
M. Gusarova, M.V. Lalayan, S.M. Polozov
MEPhI, Moscow, Russia
V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus

Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16

About •

Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)