RUPAC2012 - List of Authors (Mamkin, V.R.)

Paper	Title	Page
TUPPB050	The System of Power Supplies, Control and Modulation of Electron Gun for Free Electron Laser	427
	V.K. Ovchar, V.R. Kozak, E.A. Kuper, V.R. Mamkin, V.V. Repkov, S.S. Serednyakov, S.V. Tararyshkin, D.A. Zverev BINP SB RAS, Novosibirsk, Russia
	The system of power supplies, control and modulation based on triode cathode-grid unit was designed for producing of pulsed electron beam for free electron laser FEL The main part of the system located inside the tank filled with SF6 gas and has -300 kV potential. It's supplied through the isolated transformer and controlled through the fiber optic link with CAN interface. The GaN RF transistor in the output stage of modulator composed of hybrid assembly on the BeO ceramic plate. Pulsed output voltage of modulator can be regulated 0-120 V on the load 25 Ohm. Time duration is <1 ns. Repetition rate is 0-90 MHz. Start of modulator from timer performed through the 1GHz fiber optic link. The control code was written on C++ language under Windows operating system using QT framework.

WEPPC028	High Voltage Terminal in COSY Electron Cooler	503
	V.A. Chekavinskiy, E.A. Bekhtenev, I.A. Gusev, M.N. Kondaurov, V.R. Kozak, E.A. Kuper, V.R. Mamkin, A.S. Medvedko, D.N. Pureskin, D.V. Senkov, D.N. Skorobogatov BINP SB RAS, Novosibirsk, Russia
	In Budker INP SBRAS was developed electron cooler with energy up to 2MeV for COSY accelerator (Germany). Due to restricted footprint, cooler's collector and gun parts were combined in a single acceleration system – high voltage terminal. All power and control electronics were placed in a single isolated volume, filled with SF6 gas under 4-6 atm. pressure. Electronics is controlled via wireless CAN, and powered by multistage transformer, capable of 15 kW power at 26 kHz. Wireless control is passed through dedicated optically transparent window, also served for modulated laser beam, used in electron beam diagnostic. By construction, electronics is divided on two standalone units: collector power supply and gun-filter system (SGF). SGF is built on 19" EuroPak chassis, where were placed all power modules, needed for collector and gun pipe electrodes. All power outputs were protected against overvoltage and sparks, available while cooler exploitation. In SGF there were controlled up to 40 parameters altogether. SGF inner power supply provides stable operation in wide range of input voltage, up to ±50% from nominal. Also included in SGF are 2 auxiliary systems, used for beam guiding and beam diagnostics.

Paper

Title

Page

The System of Power Supplies, Control and Modulation of Electron Gun for Free Electron Laser

427

V.K. Ovchar, V.R. Kozak, E.A. Kuper, V.R. Mamkin, V.V. Repkov, S.S. Serednyakov, S.V. Tararyshkin, D.A. Zverev
BINP SB RAS, Novosibirsk, Russia

The system of power supplies, control and modulation based on triode cathode-grid unit was designed for producing of pulsed electron beam for free electron laser FEL The main part of the system located inside the tank filled with SF6 gas and has -300 kV potential. It's supplied through the isolated transformer and controlled through the fiber optic link with CAN interface. The GaN RF transistor in the output stage of modulator composed of hybrid assembly on the BeO ceramic plate. Pulsed output voltage of modulator can be regulated 0-120 V on the load 25 Ohm. Time duration is <1 ns. Repetition rate is 0-90 MHz. Start of modulator from timer performed through the 1GHz fiber optic link. The control code was written on C++ language under Windows operating system using QT framework.

WEPPC028

High Voltage Terminal in COSY Electron Cooler

503

V.A. Chekavinskiy, E.A. Bekhtenev, I.A. Gusev, M.N. Kondaurov, V.R. Kozak, E.A. Kuper, V.R. Mamkin, A.S. Medvedko, D.N. Pureskin, D.V. Senkov, D.N. Skorobogatov
BINP SB RAS, Novosibirsk, Russia

In Budker INP SBRAS was developed electron cooler with energy up to 2MeV for COSY accelerator (Germany). Due to restricted footprint, cooler's collector and gun parts were combined in a single acceleration system – high voltage terminal. All power and control electronics were placed in a single isolated volume, filled with SF6 gas under 4-6 atm. pressure. Electronics is controlled via wireless CAN, and powered by multistage transformer, capable of 15 kW power at 26 kHz. Wireless control is passed through dedicated optically transparent window, also served for modulated laser beam, used in electron beam diagnostic. By construction, electronics is divided on two standalone units: collector power supply and gun-filter system (SGF). SGF is built on 19" EuroPak chassis, where were placed all power modules, needed for collector and gun pipe electrodes. All power outputs were protected against overvoltage and sparks, available while cooler exploitation. In SGF there were controlled up to 40 parameters altogether. SGF inner power supply provides stable operation in wide range of input voltage, up to ±50% from nominal. Also included in SGF are 2 auxiliary systems, used for beam guiding and beam diagnostics.