RUPAC2012 - List of Authors (Kang, W.G.)

Paper

Title

Page

High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)

227

B.S. Han, W.G. Kang, S.M. Kim
EB TECH Co. Ltd., Daejeon, Republic of Korea
N.K. Kuksanov, R.A. Salimov
BINP SB RAS, Novosibirsk, Russia

Due to the necessity of pilot scale test facility for continuous treatment of wastewater and gases on the spot, a mobile electron beam irradiation system mounted on a trailer has developed in EB TECH Co. Ltd. and Budker Institute of Nuclear Physics. This mobile electron beam irradiation system is designed for the individual field application with self-shielded structure of steel plate and lead block which will satisfy the required safety figures of ICRP. Design parameters are limited by the allowable total weight and height of the trailer on the road which controlled by National Authorities. Therefore, the output parameter of electron beam is designed for 0.7 MeV and 20 kW through 600 mm window. Shielding of a mobile electron accelerator has been examined by Monte Carlo technique (MCNP code). Calculations using two different versions (version 4c2 and version 5) of MCNP showed agreements within statistical uncertainties, and the highest leakage is far below the tolerable radiation dose limit. This mobile unit will be used for on-site test of liquid waste and gaseous waste in Saudi Arabia by Saudi ARAMCO and U.S.A. by PELE Technology Inc. together with EB TECH Co. Ltd. This unit could treat up to 500m3 of liquid waste per day or 10,000 Nm3 of gases per day.

Slides FRBCH03 [11.807 MB]

Paper	Title	Page
FRBCH03	High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)	227
	B.S. Han, W.G. Kang, S.M. Kim EB TECH Co. Ltd., Daejeon, Republic of Korea N.K. Kuksanov, R.A. Salimov BINP SB RAS, Novosibirsk, Russia
	Due to the necessity of pilot scale test facility for continuous treatment of wastewater and gases on the spot, a mobile electron beam irradiation system mounted on a trailer has developed in EB TECH Co. Ltd. and Budker Institute of Nuclear Physics. This mobile electron beam irradiation system is designed for the individual field application with self-shielded structure of steel plate and lead block which will satisfy the required safety figures of ICRP. Design parameters are limited by the allowable total weight and height of the trailer on the road which controlled by National Authorities. Therefore, the output parameter of electron beam is designed for 0.7 MeV and 20 kW through 600 mm window. Shielding of a mobile electron accelerator has been examined by Monte Carlo technique (MCNP code). Calculations using two different versions (version 4c2 and version 5) of MCNP showed agreements within statistical uncertainties, and the highest leakage is far below the tolerable radiation dose limit. This mobile unit will be used for on-site test of liquid waste and gaseous waste in Saudi Arabia by Saudi ARAMCO and U.S.A. by PELE Technology Inc. together with EB TECH Co. Ltd. This unit could treat up to 500m3 of liquid waste per day or 10,000 Nm3 of gases per day.
	Slides FRBCH03 [11.807 MB]