RUPAC2012 - List of Authors (Grekhov, O.V.)

Paper	Title	Page
WEPPC003	Beam Pulse Separation System of INR Linac	451
	V.L. Serov, N.I. Brusova, A. Feschenko, O.V. Grekhov, Y.Z. Kalinin, V.N. Mikhailov, A.A. Stepanov RAS/INR, Moscow, Russia B.O. Bolshakov, A.V. Pozhensky NIIEFA, St. Petersburg, Russia
	The activity for beam intensity increasing and beam use efficiency improvement is under progress in INR linac. An important stage is the development and implementation of the Beam Pulse Separation System in the accelerator intermediate extraction area (160 MeV). The system is intended for distribution the beam pulses between Isotope Production Facility (up to 160 MeV) and the Experimental Facility located downstream of the accelerator exit. The report describes the upgrade of intermediate extraction area as well as the first results of experiments with the beam.

WEPPC034	Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory	515
	B.O. Bolshakov, A.A. Budtov, A.V. Popov, A.V. Pozhensky NIIEFA, St. Petersburg, Russia A. Feschenko, O.V. Grekhov, V.N. Mikhailov, V.L. Serov RAS/INR, Moscow, Russia
	A bending magnet with a power supply system has been designed and manufactured in the NIIEFA for the Institute for Nuclear Research RAS to ensure simultaneous operation of the linear accelerator in the experimental and isotopic systems. The arrangement has been installed and adjusted in the INR RAS. In the paper are described a schematic and principle of operation of the arrangement ensuring the bending of a part of the beam macroimpulses to the isotopic system with a frequency of up to 50 Hz. The adjustment results are presented.

WEPPD056	Development of INR Linac BCT System	671
	P.I. Reinhardt-Nickoulin, S. Bragin, V. Gaidash, O.V. Grekhov, Yu.V. Kiselev, N.F. Lebedeva, A.N. Mirzojan, A.N. Naboka, I.V. Vasilyev, O. Volodkevich RAS/INR, Moscow, Russia
	New electronics of automatic BCT system was developed to provide beam intensity measurements along INR linac. BCT electronics details are described. The available results of beam measurements are given.

Paper

Title

Page

Beam Pulse Separation System of INR Linac

451

V.L. Serov, N.I. Brusova, A. Feschenko, O.V. Grekhov, Y.Z. Kalinin, V.N. Mikhailov, A.A. Stepanov
RAS/INR, Moscow, Russia
B.O. Bolshakov, A.V. Pozhensky
NIIEFA, St. Petersburg, Russia

The activity for beam intensity increasing and beam use efficiency improvement is under progress in INR linac. An important stage is the development and implementation of the Beam Pulse Separation System in the accelerator intermediate extraction area (160 MeV). The system is intended for distribution the beam pulses between Isotope Production Facility (up to 160 MeV) and the Experimental Facility located downstream of the accelerator exit. The report describes the upgrade of intermediate extraction area as well as the first results of experiments with the beam.

WEPPC034

Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory

515

B.O. Bolshakov, A.A. Budtov, A.V. Popov, A.V. Pozhensky
NIIEFA, St. Petersburg, Russia
A. Feschenko, O.V. Grekhov, V.N. Mikhailov, V.L. Serov
RAS/INR, Moscow, Russia

A bending magnet with a power supply system has been designed and manufactured in the NIIEFA for the Institute for Nuclear Research RAS to ensure simultaneous operation of the linear accelerator in the experimental and isotopic systems. The arrangement has been installed and adjusted in the INR RAS. In the paper are described a schematic and principle of operation of the arrangement ensuring the bending of a part of the beam macroimpulses to the isotopic system with a frequency of up to 50 Hz. The adjustment results are presented.

WEPPD056

Development of INR Linac BCT System

671

P.I. Reinhardt-Nickoulin, S. Bragin, V. Gaidash, O.V. Grekhov, Yu.V. Kiselev, N.F. Lebedeva, A.N. Mirzojan, A.N. Naboka, I.V. Vasilyev, O. Volodkevich
RAS/INR, Moscow, Russia

New electronics of automatic BCT system was developed to provide beam intensity measurements along INR linac. BCT electronics details are described. The available results of beam measurements are given.