A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Kozak, V.R.


Power Supplies, Magnetic And Vacuum Systems

BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS

O.V. Belikovª, A.D. Chernyakin, V.R. Kozak, A.S. Medvedko

Budker Institute of Nuclear Physics Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia

Abstract

The bypass module was developed for correction of magnetic field in the bending magnet gap through partially taking current away from the coil. The SHUNT-20 bypass module that is presented in this work is able to take a current of up to 20A away from the coil of electromagnet. The device developed allows both recuperation of the taken energy to the main power source of the electromagnet and energy dump to a ballast load. The bypass module is remotely monitored and controlled through a CAN-bus. The SHUNT-20 modules are made by the Switch Mode Technology with application of the up-to-date components in the "Euromechanics" standard.

ª – corresponding author

Paper 

171

Power Supplies, Magnetic And Vacuum Systems

FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDER

O.V. Belikovª, V.R. Kozak, A.S. Medvedko

Budker Institute of Nuclear Physics Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia

Abstract

Specialized power supplies for electromagnets for accelerators and charged particle storage rings have been designed and manufactured at Budker Institute of Nuclear Physics for many years [1]. It turned out to be optimal to divide power supplies for correction elements into two groups according to their output parameters. This work presents two types of power supplies for steering magnets with a maximum output current of ±6À (MPS-6) and ±25À (MPS-25). The power supplies are manufactured under the Switch Mode Technology in the "Euromechanics" standard with application of up-to-date components.

ª – corresponding author

Paper Slides

244

Power Supplies, Magnetic And Vacuum Systems

POWER SUPPLIES FOR THE BENDING MAGNETS OF THE BEP AND VEPP-2000 STORAGE RING

K.M. Gorchakovª, S.S. Vasichev, V.F. Veremeenko, V.R. Kozak, A.S. Medvedko, R.Z. Pronik, V.P. Prosvetov, O.A. Proskurina

Budker Institute of Nuclear Physics Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia

Abstract

In autumn 2006 at BINP was started new complex VEPP-2000. The two new power supply for bending magnet was built for BEP and VEPP-2000 storage ring.

ª – corresponding author

Paper 

156