RuPAC 2006 - List of Authors

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Veremeenko, V.F.

Paper	Title	Page
TUHO05	Power Supplies for the Bending Magnets of the BEP and VEPP-2000 Storage Ring K.M.Gorchakov, Yu.A.Evtouchenko, V.R.Kozak, A.S.Medvedko, S.P.Petrov, R.Z.Pronik, O.A.Proskurina, V.P.Prosvetov, S.S.Vasichev, V.F.Veremeenko Budker Institute of Nuclear Physics, Novosibirsk, Russia Two power supply systems for bending magnets of the buster ring BEP and for the collider VEPP-2000 are described. The power supply for bending magnets of buster ring BEP has reversible current polarity with maximal current up to 10kA and maximal voltage up to 340V. Current instability is better than 50ppm. System is designed like a combination of eight thyristor rectifier modules and their passive filters joined in parallel to organize twelve ; pulse rectifier. System is equipped with the 10kA thyristor bridge to reverse the current polarity. The power supply for the collider VEPP-2000 consists of two thyristor rectifier modules and their passive filters joined in parallel. This power supply has unidirectional output current of up to 10kA with maximal output voltage 120V. Current instability is better than 10ppm. Precise DAC and ADC modules for control and measurements are essential parts of the systems. Parameters, interesting schematics and tests results should be presented.	91
MOCP02	Precision Current Source of the Inverter Type VCH-3000-12 to Power Magnetic Systems of Accelerators and Charged Particle Storage Rings S.S. Vasichev, V.M. Velikanov, V.F. Veremeenko, S.P. Petrov, V.R. Kozak Budker Institute of Nuclear Physics, Novosibirsk, Russia This paper describes a precision bidirectional current source VCH-300-10 designed for supplying superconducting solenoids. This device has the following parameters: - output current -300 0 +300A, - output voltage -10 0 +10V, - current long-term stability 0,005%, - power grid harmonics ripple level no more than 10mV. This device has both manual and PS control. PS control uses RS-232 and USB interfaces.	177

Paper

Title

Page

Power Supplies for the Bending Magnets of the BEP and VEPP-2000 Storage Ring

K.M.Gorchakov, Yu.A.Evtouchenko, V.R.Kozak, A.S.Medvedko, S.P.Petrov, R.Z.Pronik, O.A.Proskurina, V.P.Prosvetov, S.S.Vasichev, V.F.Veremeenko
Budker Institute of Nuclear Physics, Novosibirsk, Russia

Two power supply systems for bending magnets of the buster ring BEP and for the collider VEPP-2000 are described. The power supply for bending magnets of buster ring BEP has reversible current polarity with maximal current up to 10kA and maximal voltage up to 340V. Current instability is better than 50ppm. System is designed like a combination of eight thyristor rectifier modules and their passive filters joined in parallel to organize twelve ; pulse rectifier. System is equipped with the 10kA thyristor bridge to reverse the current polarity. The power supply for the collider VEPP-2000 consists of two thyristor rectifier modules and their passive filters joined in parallel. This power supply has unidirectional output current of up to 10kA with maximal output voltage 120V. Current instability is better than 10ppm. Precise DAC and ADC modules for control and measurements are essential parts of the systems. Parameters, interesting schematics and tests results should be presented.

MOCP02

Precision Current Source of the Inverter Type VCH-3000-12 to Power Magnetic Systems of Accelerators and Charged Particle Storage Rings

S.S. Vasichev, V.M. Velikanov, V.F. Veremeenko, S.P. Petrov, V.R. Kozak
Budker Institute of Nuclear Physics, Novosibirsk, Russia

This paper describes a precision bidirectional current source VCH-300-10 designed for supplying superconducting solenoids. This device has the following parameters: - output current -300 0 +300A, - output voltage -10 0 +10V, - current long-term stability 0,005%, - power grid harmonics ripple level no more than 10mV. This device has both manual and PS control. PS control uses RS-232 and USB interfaces.

177

MOCP13

High-Power Precision Current Supply IST-1000-100 for Elements of Magnetic Systems of Accelerators and Charged Particle Storage Rings

A.D.Chernyakin, V.R.Kozak, S.P.Petrov, S.S.Vasichev, V.F.Veremeenko, Yu.M.Velikanov, V.G.Volohov
Budker Institute of Nuclear Physics, Novosibirsk, Russia

This paper describes a precision current source 1000A 100V designed for supplying storage ring magnetic systems. This device has the following parameters: - current long-term stability: 0,005%. - output current ripple level no more than 0,01%. The device is controlled by PC using CAN interface.

203