Paper | Title | Page |
---|---|---|
FRPMN028 | Design and E. M. Analysis of the New DAFNE Interaction Region | 3988 |
A new interaction region (IR) vacuum chamber has been designed for the DAFNE upgrade aimed at testing of the crabbed waist collision scheme. Compared to the existing IR vacuum chamber, the new one has a simplified design and consists essentially of the confluence of straight tubes, having a double Y shape. Sharp discontinuities have been avoided to limit the beam impedance of the structure. However, the study of the electromagnetic interaction with the beam is necessary in order to avoid excessive power loss due to eventual higher order modes (HOM) trapped in the Y-shape chamber. With HFSS the first design of the chamber has been analyzed and HOMs have been found and characterized. On the basis of these results some modifications in the geometry of the IR chamber have been introduced to eliminate or attenuate these trapped resonances. The results of these simulations are presented. | ||
MOOBKI02 | DAΦ NE Phi-Factory Upgrade for Siddharta Run | 66 |
|
||
An upgrade of the DAΦNE Phi-Factory at LNF is foreseen in view of the installation of the Siddharta detector in 2007. A new Interaction Region suitable to test the large crossing angle and crabbed waist collision schemes* will be installed. Other machine improvements, such as wigglers modifications, new injection kickers and chambers coating will be realized with the goal of reaching luminosity of the order of 1033/cm2/s. The principle of operation of the new scheme, together with hardware designs and simulation studies, will be presented.
*DAPHNE Upgrade Team, "DAPHNE Upgrade for Siddharta run", DAPHNE Tech. Note G-68, LNF-INFN, Dec. 2006 |
||
|
Slides | |
TUPAN036 | DAPHNE Upgrade: A New Magnetic and Mechanical Layout | 1466 |
|
||
The DAPHNE Phi-Factory upgrade, foreseen for the Siddharta detector run in 2007, will require a new magnetic and mechanical layout to exploit the "large crossing angle" and "crabbed waist" concepts*. New permanent quadrupole magnets and aluminium vacuum chamber with thin window have been designed for the new interaction region, with the aim to reuse at maximum the present magnetic and vacuum chamber components. A vacuum chamber of novel design will allow separating the beams at the second interaction region. Designs and results for the new layout will be presented.
* DAPHNE Upgrade Team, "DAPHNE Upgrade for Siddharta run", DAPHNE Tech. Note G-68, Dec. 2006. |
||
TUPAN033 | DAΦ NE Setup and Performances During the Second FINUDA Run | 1457 |
|
||
Beam operations on DAΦNE restarted on October 2006 after a four months shut-down to remove the KLOE experimental detector and to install the FINUDA one. This period has been also used for maintenance and implementation of several upgrades. In the first two months of operation the peak and integrated luminosity already exceeds the values obtained during the first FINUDA run by 20%. The DAΦNE goal is to deliver 1 fb-1 integrated luminosity by the end of May 2007. The collider performances during the run are presented together with the improvements obtained in terms of ring nonlinearities and beam dynamics coming from several collider modifications. |