| Paper |
Title |
Page |
| TUPMN050 |
Development of Pulsed-Laser Super-Cavity for Compact X-Ray Source Based on Laser-Compton Scattering
|
1034 |
| |
- K. Sakaue
- S. Araki, M. K. Fukuda, Y. Higashi, Y. Honda, T. Taniguchi, N. Terunuma, J. Urakawa
KEK, Ibaraki
- N. Sasao, H. Yokoyama
Kyoto University, Kyoto
- M. Takano
Tsukuba-shi, Ibaraki-ken
- M. Washio
RISE, Tokyo
|
|
| |
A compact and high quality x-ray source is required from various field, such as medical diagnosis, drug manifacturing and biological sciences. Laser-Compton based x-ray source that consist of a compact electron storage ring and a pulsed-laser super-cavity is one of the solutions of compact x-ray source. Pulsed-laser super-cavity has been developed for a compact high brightness x-ray sources at KEK-ATF. The pulsed-laser super-cavity increases the laser power and stably makes small laser beam size at the collision point with the electron beam. Recently, 357MHz mode-locked Nd:VAN laser pulses can be stacked stably in a 420mm long Fabry-Perot cavity with 1'000 enhancement in our R&D. Therefore, we have planned a compact hard x-ray sources using 50MeV multi-bunch electrons and a pulse stacking technology with 42cm Fabry-Perot cavity. (LUCX Project at KEK) The photon flux is multiplied with the number of bunches by using multi-bunch beam and super-cavity. Development of the super-cavity and present result of LUCX will be presented at the conference.
|
|
| THPAN038 |
Generation and Acceleration of High Brightness Electron Bunch Train in ATF of KEK
|
3312 |
| |
- S. Liu
- S. Araki, M. K. Fukuda, M. Takano, N. Terunuma, J. Urakawa
KEK, Ibaraki
- K. Hirano
NIRS, Chiba-shi
|
|
| |
Laser Undulator Compact X-ray source (LUCX) is a test bench for compact high brightness X-ray generator at KEK in order to demonstrate the possibility on K-edge digital subtraction angiography, based on the Compton Scattering. For this project, one of the challenging problems is to generate and accelerate high brightness multi-bunch electron beams, compensating the energy difference due to beam loading effect. In this paper, we calculate the transient beam loading voltage and energy gain from RF field in standing wave gun cavity and traveling wave accelerating tube for multi-bunch train, considering the process of propagation, buildup of RF field in them and the special RF pulse shape. We generated and accelerated 100 bunch electron beam train with 50nC, which beam loading effect was compensated effectively by adjusting the laser injection timing. By BPM and OTR system, we measured the electron beam energy bunch by bunch. The average energy of 100 bunch train is 40.5MeV and maximum energy difference bunch to bunch is 0.26MeV, the relative energy spread of single bunch is about 0.13%. The transverse emittance can be optimized roughly to 3.6 pimm.mrad.
|
|