PAC07 - List of Authors (Boogert, S. T.)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Boogert, S. T.

Paper	Title	Page
THOAC01	ATF Extraction Line Laser-Wire System	2636
	L. Deacon, G. A. Blair, S. T. Boogert, A. Bosco, L. Corner, L. Deacon, N. Delerue, F. Gannaway, D. F. Howell, V. Karataev, M. Newman, A. Reichold, R. Senanayake, R. Walczak JAI, Oxford A. Aryshev, H. Hayano, K. Kubo, N. Terunuma, J. Urakawa KEK, Ibaraki G. E. Boorman Royal Holloway, University of London, Surrey B. Foster OXFORDphysics, Oxford, Oxon
	Funding: PPARC LC-ABD Collaboration Royal Society Daiwa Foundation Commission of European Communities under the 6th Framework Programme Structuring the European Research Area, contract number RIDS-011899 The ATF extraction line laser-wire (LW) aims to achieve a micron-scale laser spot size and to verify that micron-scale beam profile measurements can be performed at the International Linear Collider beam delivery system. Recent upgrades to the LW system are presented together with recent results including the first use of the LW as a beam diagnostic tool.
	Slides
MOPAN110	A Technique for High-frequency Scanning of High Power Laser Light for Laser-wire Scanners at Electrons Accelerators	422
	A. Bosco G. A. Blair, S. T. Boogert, G. E. Boorman Royal Holloway, University of London, Surrey
	Funding: Work supported in part by PPARC LC-ABD Collaboration and the Commission of European Communities under the 6th Framework Programme Structuring the European Research Area, contract number RIDS-011899. Electro-optic techniques might allow implementing a laserwire scanner for intra-train scanning at the ILC with scanning speed in excess of 100 kHz. A scanner capable of running at such a rate would in fact provide information about the particle beam size in about one hundred different positions along the bunch train (approximately 1ms long for the ILC). The design of an electro-optic deflector capable to scan within 10-100 microsecond is presented, discussed and analytically treated. ILC Baseline Conceptual Design (2006).: http://www.linearcollider.org/.
THPMN072	Material Damage Test for ILC Collimators	2868
	J.-L. Fernandez-Hernando G. A. Blair, S. T. Boogert Royal Holloway, University of London, Surrey G. Ellwood, R. J.S. Greenhalgh STFC/RAL, Chilton, Didcot, Oxon L. Keller SLAC, Menlo Park, California N. K. Watson Birmingham University, Birmingham
	Simulations were completed to determine the energy deposition of an ILC bunch using FLUKA , Geant4 and EGS4 to a set of different spoiler designs. These shower simulations were used as inputs to thermal and mechanical studies using ANSYS. This paper presents different proposals to carry out a material damage test beam that would benchmark the energy deposition simulations and the ANSYS studies and give the researchers valuable data which will help achieve a definitive ILC spoiler design.
WEOCAB01	Design of the Beam Delivery System for the International Linear Collider	1985
	A. Seryi I. V. Agapov, G. A. Blair, S. T. Boogert, J. Carter Royal Holloway, University of London, Surrey M. Alabau, P. Bambade, J. Brossard, O. Dadoun LAL, Orsay J. A. Amann, R. Arnold, F. Asiri, K. L.F. Bane, P. Bellomo, E. Doyle, A. F. Fasso, L. Keller, J. Kim, K. Ko, Z. Li, T. W. Markiewicz, T. V.M. Maruyama, K. C. Moffeit, S. Molloy, Y. Nosochkov, N. Phinney, T. O. Raubenheimer, S. Seletskiy, S. Smith, C. M. Spencer, P. Tenenbaum, D. R. Walz, G. R. White, M. Woodley, M. Woods, L. Xiao SLAC, Menlo Park, California M. Anerella, A. K. Jain, A. Marone, B. Parker BNL, Upton, Long Island, New York D. A.-K. Angal-Kalinin, C. D. Beard, J.-L. Fernandez-Hernando, P. Goudket, F. Jackson, J. K. Jones, A. Kalinin, P. A. McIntosh STFC/DL/ASTeC, Daresbury, Warrington, Cheshire R. Appleby UMAN, Manchester J. L. Baldy, D. Schulte CERN, Geneva L. Bellantoni, A. I. Drozhdin, V. S. Kashikhin, V. Kuchler, T. Lackowski, N. V. Mokhov, N. Nakao, T. Peterson, M. C. Ross, S. I. Striganov, J. C. Tompkins, M. Wendt, X. Yang Fermilab, Batavia, Illinois K. Buesser DESY, Hamburg P. Burrows, G. B. Christian, C. I. Clarke, A. F. Hartin OXFORDphysics, Oxford, Oxon G. Burt, A. C. Dexter Cockcroft Institute, Warrington, Cheshire J. Carwardine, C. W. Saunders ANL, Argonne, Illinois B. Constance, H. Dabiri Khah, C. Perry, C. Swinson JAI, Oxford O. Delferriere, O. Napoly, J. Payet, D. Uriot CEA, Gif-sur-Yvette C. J. Densham, R. J.S. Greenhalgh STFC/RAL, Chilton, Didcot, Oxon A. Enomoto, S. Kuroda, T. Okugi, T. Sanami, Y. Suetsugu, T. Tauchi KEK, Ibaraki A. Ferrari UU/ISV, Uppsala J. Gronberg LLNL, Livermore, California Y. Iwashita Kyoto ICR, Uji, Kyoto W. Lohmann DESY Zeuthen, Zeuthen L. Ma STFC/DL, Daresbury, Warrington, Cheshire T. M. Mattison UBC, Vancouver, B. C. T. S. Sanuki University of Tokyo, Tokyo V. I. Telnov BINP SB RAS, Novosibirsk E. T. Torrence University of Oregon, Eugene, Oregon D. Warner Colorado University at Boulder, Boulder, Colorado N. K. Watson Birmingham University, Birmingham H. Y. Yamamoto Tohoku University, Sendai
	The beam delivery system for the linear collider focuses beams to nanometer sizes at the interaction point, collimates the beam halo to provide acceptable background in the detector and has a provision for state-of-the art beam instrumentation in order to reach the physics goals. The beam delivery system of the International Linear Collider has undergone several configuration changes recently. This paper describes the design details and status of the baseline configuration considered for the reference design.
	Slides
FRPMN090	A Prototype Energy Spectrometer for the ILC at End Station A in SLAC	4285
	A. Lyapin C. Adolphsen, R. Arnold, C. Hast, D. J. McCormick, Z. Szalata, M. Woods SLAC, Menlo Park, California S. T. Boogert, G. E. Boorman Royal Holloway, University of London, Surrey M. V. Chistiakova, Yu. G. Kolomensky, E. Petigura, M. Sadre-Bazzaz UCB, Berkeley, California V. N. Duginov, S. A. Kostromin, N. A. Morozov JINR, Dubna, Moscow Region F. Gournaris, B. Maiheu, D. J. Miller, M. Wing UCL, London M. Hildreth Notre Dame University, Notre Dame, Iowa H. J. Schreiber, M. Viti DESY Zeuthen, Zeuthen M. Slater, M. Thomson, D. R. Ward University of Cambridge, Cambridge
	The main physics programme of the international linear collider requires a measurement of the beam energy with a relative precision on the order of 10^-4 or better. To achieve this goal a magnetic spectrometer using high resolution beam position monitors (BPM) has been proposed. A prototype spectrometer chicane using 4 dipole magnets is currently under development at the End Station A in SLAC, intending to demonstrate the required stability of this method and investigate possible systematic effects and operational issues. This contribution reports on the successful commissioning of the beam position monitor system and the resolution and stability achieved. Also, the initial results from a run with a full spectrometer chicane are presented.
FRPMN094	Beam Profile Measurements with the 2-D Laser-Wire at PETRA	4303
	M. T. Price K. Balewski, Eckhard. Elsen, V. Gharibyan, H.-C. Lewin, F. Poirier, S. Schreiber, N. J. Walker, K. Wittenburg DESY, Hamburg G. A. Blair, S. T. Boogert, G. E. Boorman, A. Bosco, S. Malton Royal Holloway, University of London, Surrey T. Kamps BESSY GmbH, Berlin
	Funding: Work supported by the PPARC LC-ABD collaboration and the Commission of the European Communities under the 6th Framework Programme Structuring the European Research Area, contract number RIDS-011899. The current PETRA II Laser-Wire system, being developed for the ILC and PETRA III, uses a piezo-driven mirror to scan laser light across an electron bunch. This paper reports on the recently installed electron-beam finding system, presenting recent horizontal and vertical profile scans with corresponding studies.
FRPMS049	Resolution of a High Performance Cavity Beam Position Monitor System	4090
	S. Walston S. T. Boogert Royal Holloway, University of London, Surrey C. C. Chung, P. Fitsos, J. Gronberg LLNL, Livermore, California J. C. Frisch, S. Hinton, J. May, D. J. McCormick, S. Smith, T. J. Smith, G. R. White SLAC, Menlo Park, California H. Hayano, Y. Honda, N. Terunuma, J. Urakawa KEK, Ibaraki Yu. G. Kolomensky, T. Orimoto UCB, Berkeley, California P. Loscutoff LBNL, Berkeley, California A. Lyapin, S. Malton, D. J. Miller UCL, London R. Meller Cornell University, Department of Physics, Ithaca, New York M. C. Ross Fermilab, Batavia, Illinois M. Slater, M. Thomson, D. R. Ward University of Cambridge, Cambridge V. Vogel DESY, Hamburg
	International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. It is important to the ILC design effort to demonstrate that these tolerances can be achieved – ideally using beam-based stability measurements. It has been estimated that RF cavity beam position monitors (BPMs) could provide position measurement resolutions of less than one nanometer and could form the basis of the desired beam-based stability measurement. We have developed a high resolution RF cavity BPM system. A triplet of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. A metrology system for the three BPMs was recently installed. This system employed optical encoders to measure each BPM's position and orientation relative to a zero-coefficient of thermal expansion carbon fiber frame and has demonstrated that the three BPMs behave as a rigid-body to less than 5 nm. To date, we have demonstrated a BPM resolution of less than 20 nm over a dynamic range of ± 20 microns.