A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Yoon, J.C.

Paper Title Page
WPAT015 The Digital Feedback RF Control System of the RFQ and DTL1 for 100 MeV Proton Linac of PEFP 1443
 
  • I.H. Yu, Y.J. Han, H.-S. Kang, D.T. Kim, S.-C. Kim, I.-S. Park, J.C. Yoon
    PAL, Pohang, Kyungbuk
  • Y.-S. Cho, H.-J. Kwon, K.T. Seol
    KAERI, Daejon
 
  Funding: Work supported by the PEFP (Proton Engineering Frontier Project), Korea

The 100 MeV Proton linear accelerator (Linac) for the PEFP (Proton Engineering Frontier Project) will include 1 RFQ and 1 DTL1 at 350 MHz as well as 7 DTL2 cavities at 700 MHz. The low level RF system with the digital feedback RF control provides the field control to accelerate a 20mA proton beam from 50 keV to 20 MeV with a RFQ and a DTL1 at 350M Hz. The FPGA-based digital feedback RF control system has been built and is used to control cavity field amplitude within ± 1% and relative phase within ± 1°. The fast digital processing is networked to the EPICS-based control system with an embedded processor (Blackfin). In this paper, the detailed description of the digital feedback RF control system will be described with the performance test results.

 
FPAT050 Improvement RF Control System for the 20 Mev Proton Linac of PEFP 3100
 
  • J.C. Yoon, J. Choi, H.-S. Kang, J.-W. Lee
    PAL, Pohang, Kyungbuk
 
  Funding: EPICS, Control, LLRF.

This paper presents the RF control system for Korea Multi-purpose Accelerator Complex (KOMAC). KAERI (Korea Atomic Energy Research Institute) has been performing the project named KOMAC. As the 3nd phase of the project, 20MeV proton accelerating structure is under development. The new design is based on the use of VME based Multi-function modules connected to the specific low level RF Controllers(LLRF) via distributed I/O modules and Serial communication modules. The control system was based on EPICS (Experimental Physics and Industrial Control System) from the end of 2004. Installation and commissioning of the RF module is scheduled on 2005. Control system to integrated the RF System to the KOMAC control system is implemented. Hardware, software and various applications are upgrade to support the operation of RF Control system. In this paper, We describe control structure and scheme of the current RF Control System and upgraded one.