A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Woods, M.

Paper Title Page
RPPP030 Design of ILC Extraction Line for 20 mrad Crossing Angle 2134
 
  • Y. Nosochkov, K. C. Moffeit, A. Seryi, M. Woods
    SLAC, Menlo Park, California
  • R. Arnold
    University of Massachusetts, Amherst
  • W.P. Oliver
    Tufts University, Medford, Massachusetts
  • B. Parker
    BNL, Upton, Long Island, New York
  • E.T. Torrence
    University of Oregon, Eugene, Oregon
 
  Funding: Work supported by the Department of Energy Contract DE-AC02-76SF00515.

One of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow to extract the spent beams in a separate beam line. In this paper, the extraction line design for 20 mrad crossing angle is presented. This beam line transports the primary e+/e- and beamstrahlung photon beams from the IP to a common dump, and includes diagnostic section for energy and polarization measurements. The optics is designed for a large energy acceptance to minimize losses in the low energy tail of the disrupted beam. The extraction optics, diagnostic instrumentation and particle tracking simulations are described.

 
RPPP036 A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components 2461
 
  • M. Woods, R.A. Erickson, J.C. Frisch, C. Hast, R.K. Jobe, L. Keller, T.W. Markiewicz, T.V.M. Maruyama, D.J. McCormick, J. Nelson, N. Phinney, T.O. Raubenheimer, M.C. Ross, A. Seryi, S. Smith, Z. Szalata, P. Tenenbaum, M. Woodley
    SLAC, Menlo Park, California
  • D.A.-K. Angal-Kalinin, C.D. Beard, F.J. Jackson, A. Kalinin
    CCLRC/DL/ASTeC, Daresbury, Warrington, Cheshire
  • R. Arnold
    University of Massachusetts, Amherst
  • D. Bailey
    ,
  • R.J. Barlow, G.Yu. Kourevlev, A. Mercer
    UMAN, Manchester
  • S.T. Boogert, A. Liapine, S. Malton, D.J. Miller, M.W. Wing
    UCL, London
  • P. Burrows, G.B. Christian, C.C. Clarke, A.F. Hartin, S. Molloy, G.R. White
    Queen Mary University of London, London
  • D. Burton, N. Shales, J. Smith, A. Sopczak, R. Tucker
    Microwave Research Group, Lancaster University, Lancaster
  • D. Cussans
    University of Bristol, Bristol
  • C. Densham, J. Greenhalgh
    CCLRC/DL, Daresbury, Warrington, Cheshire
  • M.H. Hildreth
    Notre Dame University, Notre Dame, Iowa
  • Y.K. Kolomensky
    UCB, Berkeley, California
  • W.F.O. Müller, T. Weiland
    TEMF, Darmstadt
  • N. Sinev, E.T. Torrence
    University of Oregon, Eugene, Oregon
  • M.S. Slater, M.T. Thomson, D.R. Ward
    University of Cambridge, Cambridge
  • Y. Sugimoto
    KEK, Ibaraki
  • S.W. Walston
    LLNL, Livermore, California
  • N.K. Watson
    Birmingham University, Birmingham
  • I. Zagorodnov
    DESY, Hamburg
  • F. Zimmermann
    CERN, Geneva
 
  Funding: U.S. Department of Energy.

The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A (ESA). A 10Hz beam at 28.5 GeV energy can be delivered to ESA, parasitic with PEP-II operation. During the engineering design phase for the ILC over the next 5 years, we plan to use this facility to prototype and test key components of the Beam Delivery System (BDS) and Interaction Region (IR). We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to Collimator Wakefields, Materials Damage Tests and Energy Spectrometers. We also plan an IR Mockup of the region within 5 meters of the ILC Interaction Point to investigate effects from backgrounds and beam rf higher-order modes (HOMs).