A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Welch, D.R.

Paper Title Page
TPAT068 A Fast Faraday Cup for the Neutralized Drift Compression Experiment 3765
 
  • A.B. Sefkow, R.C. Davidson, P. Efthimion, E.P. Gilson
    PPPL, Princeton, New Jersey
  • F.M. Bieniosek, J.E. Coleman, S. Eylon, W.G. Greenway, E. Henestroza, J.W. Kwan, P.K. Roy, D.L. Vanecek, W. Waldron, S. Yu
    LBNL, Berkeley, California
  • D.R. Welch
    ATK-MR, Albuquerque, New Mexico
 
  Funding: Research supported by the U.S. Department of Energy.

Heavy ion drivers for high energy density physics applications and inertial fusion energy use space-charge-dominated beams which require longitudinal bunch compression in order to achieve sufficiently high beam intensity at the target. The Neutralized Drift Compression Experiment-1A (NDCX-1A) at Lawrence Berkeley National Laboratory (LBNL) is used to determine the effective limits of neutralized drift compression. NDCX-1A investigates the physics of longitudinal drift compression of an intense ion beam, achieved by imposing an initial velocity tilt on the drifting beam and neutralizing the beam's space-charge with background plasma. Accurately measuring the longitudinal compression of the beam pulse with high resolution is critical for NDCX-1A, and an understanding of the accessible parameter space is modeled using the LSP particle-in-cell (PIC) code. The design and preliminary experimental results for an ion beam probe which measures the total beam current at the focal plane as a function of time are summarized.

 
RPAP039 Accelerator and Ion Beam Tradeoffs for Studies of Warm Dense Matter 2568
 
  • J.J. Barnard, D. A. Callahan, A. Friedman, R.W. Lee, M. Tabak
    LLNL, Livermore, California
  • R.J. Briggs
    SAIC, Alamo, California
  • R.C. Davidson, L. Grisham
    PPPL, Princeton, New Jersey
  • E. P. Lee, B. G. Logan, P. Santhanam, A. Sessler, J.W.  Staples, J.S. Wurtele, S. Yu
    LBNL, Berkeley, California
  • C. L. Olson
    Sandia National Laboratories, Albuquerque, New Mexico
  • D. Rose, D.R. Welch
    ATK-MR, Albuquerque, New Mexico
 
  Funding: Work performed under the auspices of the U.S. Department of Energy under University of California contract W-7405-ENG-48 at LLNL, University of California contract DE-AC03-76SF00098 at LBNL, and contract DEFG0295ER40919 at PPPL.

One approach to heat a target to "Warm Dense Matter" conditions (similar, for example, to the interiors of giant planets or certain stages in Inertial Confinement Fusion targets), is to use intense ion beams as the heating source. By consideration of ion beam phase space constraints, both at the injector, and at the final focus, and consideration of simple equations of state, approximate conditions at a target foil may be calculated. Thus target temperature and pressure may be calculated as a function of ion mass, ion energy, pulse duration, velocity tilt, and other accelerator parameters. We examine the variation in target performance as a function of various beam and accelerator parameters, in the context of several different accelerator concepts, recently proposed for WDM studies.

 
FPAE077 LSP Simulations of the Neutralized Drift Compression Experiment 4006
 
  • C.H. Thoma, D.R. Welch
    ATK-MR, Albuquerque, New Mexico
  • S. Eylon, E. Henestroza, P.K. Roy, S. Yu
    LBNL, Berkeley, California
  • E.P. Gilson
    PPPL, Princeton, New Jersey
 
  Funding: Work supported by the VNL for HIF through PPPL and LBNL.

The Neutralized Drift Compression Experiment (NDCX) at Lawrence Berkeley National Laboratory involves the longitudinal compression of a singly-stripped K ion beam with a mean energy of 250 keV in a meter long plasma. We present simulation results of compression of the NDCX beam using the PIC code LSP. The NDCX beam encounters an acceleration gap with a time-dependent voltage that decelerates the front and accelerates the tail of a 500 ns pulse which is to be compressed 110 cm downstream. The simulations model both ideal and experimental voltage waveforms. Results show good longitudinal compression without significant emittance growth.

 
ROAB003 Highly Compressed Ion Beams for High Energy Density Science 339
 
  • A. Friedman, J.J. Barnard, D. A. Callahan, G.J. Caporaso, D.P. Grote, R.W. Lee, S.D. Nelson, M. Tabak
    LLNL, Livermore, California
  • R.J. Briggs
    SAIC, Alamo, California
  • C.M. Celata, A. Faltens, E. Henestroza, E. P. Lee, M. Leitner, B. G. Logan, G. Penn, L. R. Reginato, A. Sessler, J.W.  Staples, W. Waldron, J.S. Wurtele, S. Yu
    LBNL, Berkeley, California
  • R.C. Davidson, L. Grisham, I. Kaganovich
    PPPL, Princeton, New Jersey
  • C. L. Olson, T. Renk
    Sandia National Laboratories, Albuquerque, New Mexico
  • D. Rose, C.H. Thoma, D.R. Welch
    ATK-MR, Albuquerque, New Mexico
 
  Funding: Work performed under auspices of USDOE by U. of CA LLNL & LBNL, PPPL, and SNL, under Contract Nos. W-7405-Eng-48, DE-AC03-76SF00098, DE-AC02-76CH03073, and DE-AC04-94AL85000, and by MRC and SAIC.

The Heavy Ion Fusion Virtual National Laboratory (HIF-VNL) is developing the intense ion beams needed to drive matter to the High Energy Density (HED) regimes required for Inertial Fusion Energy (IFE) and other applications. An interim goal is a facility for Warm Dense Matter (WDM) studies, wherein a target is heated volumetrically without being shocked, so that well-defined states of matter at 1 to 10 eV are generated within a diagnosable region. In the approach we are pursuing, low to medium mass ions with energies just above the Bragg peak are directed onto thin target "foils," which may in fact be foams or "steel wool" with mean densities 1% to 100% of solid. This approach complements that being pursued at GSI, wherein high-energy ion beams deposit a small fraction of their energy in a cylindrical target. We present the requirements for warm dense matter experiments, and describe suitable accelerator concepts, including novel broadband traveling wave pulse-line, drift-tube linac, RF, and single-gap approaches. We show how neutralized drift compression and final focus optics tolerant of large velocity spread can generate the necessarily compact focal spots in space and time.

 
FPAE071 Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam 3856
 
  • P.K. Roy, A. Anders, D. Baca, F.M. Bieniosek, J.E. Coleman, S. Eylon, W.G. Greenway, E. Henestroza, M. Leitner, B. G. Logan, D. Shuman, D.L. Vanecek, W. Waldron, S. Yu
    LBNL, Berkeley, California
  • R.C. Davidson, P. Efthimion, E.P. Gilson, I. Kaganovich, A.B. Sefkow
    PPPL, Princeton, New Jersey
  • D. Rose, C.H. Thoma, D.R. Welch
    ATK-MR, Albuquerque, New Mexico
  • W.M. Sharp
    LLNL, Livermore, California
 
  Funding: This work was supported by the Director, Office of Science, Office of Fusion Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098.

Ion beam neutralization and compression experiments are designed to determine the feasibility of using compressed high intensity ion beams for high energy density physics (HEDP) experiments and for inertial fusion power. To quantitatively ascertain the various mechanisms and methods for beam compression, the Neutralized Drift Compression Experiment (NDCX) facility is being constructed at Lawrence Berkeley National Laboratory (LBNL). In the first compression experiment, a 260 KeV, 25 mA, K+ ion beam of centimeters size is radially compressed to a mm size spot by neutralization in a meter-long plasma column and beam peak current is longitudinally compressed by an induction velocity tilt core. Instrumentation, preliminary results of the experiments, and practical limits of compression are presented. These include parameters such as emittance, degree of neutralization, velocity tilt time profile, and accuracy of measurements (fast and spatially high resolution diagnostic) are discussed.