| Paper |
Title |
Page |
| RPAE050 |
Status of the CAMD Light Source
|
3103 |
| |
- V.P. Suller
CCLRC/DL/ASTeC, Daresbury, Warrington, Cheshire
- E.J. Anzalone, M.G. Fedurin, P. Jines, D.J. Launey, T.A. Miller, Y. Wang
LSU/CAMD, Baton Rouge, Louisiana
|
|
| |
With the increasing diversity of its research program, the CAMD Light Source has improved its beam brightness and quality. Using a well calibrated model of the lattice, the ring optic has been refined to generate a lower beam emittance of 150 nm.rad and this has been confirmed by measuring the beta values with the modulated quadrupole shunt system. The beam sizes have also been measured with an X-ray pinhole camera and compared to the calculated emittance. The beam orbit is corrected to a standard position referenced to the quadrupole centers to a precision better than 0.5 mm, using a suite of well localized bumps which can also flexibly steer the user photon beams to their requirements. Beam reliability has been improved by bringing into use a VME control system for the energy ramp.
|
|
| FPAT056 |
RF Control System Upgrade at CAMD
|
3339 |
| |
- V.P. Suller
CCLRC/DL/ASTeC, Daresbury, Warrington, Cheshire
- M.G. Fedurin, P. Jines, D.J. Launey
LSU/CAMD, Baton Rouge, Louisiana
|
|
| |
A description is given of the new control system for the RF system of the CAMD light source. The new design being implemented brings all RF signals into the data acquisition system via a modular, custom made, RF detector and renders the amplitude and tune control loops in the VME computer. On line calculations ensure monitoring of proper operation and display the information to the user in an efficient way. In addition, an advanced load impedance monitoring diagnostic has been implemented, being displayed as a Smith Chart, which is based on the system used at the SRS in Daresbury, England.
|
|