| Paper | Title | Page |
|---|---|---|
| WPAP037 | Novel Method of Emittance Preservation in ERL Merging System in Presence of Strong Space Charge Forces | 2512 |
|
||
|
Funding: Work performed under the auspices of the U.S. Department of Energy and partially funded by the US Department of Defence Energy recovery linacs (ERLs) are potential candidates for the high power and high brightness electron beams sources. The main advantages of ERL are that electron beam is generated at relatively low energy, injected and accelerated to the operational energy in a ERL loop with a common linac, then is decelerated in the same loop down to injection energy and dumped. The intrinsic part of any ERL is a merging system for the low-energy beam with a high-energy beam passing around the ERL loop. One of the challenges for generating high charge high brightness e-beam in ERL is development of merging system, which provides achromatic condition for space charge dominated beam and which is compatible with the emittance compensation scheme. In this paper we present principles of operation of such merging system. We also describe an example of such system, which we call Zigzag or Z-system. We use a specific implementation for R&D ERL at Brookhaven for illustration. |
||
| WPAP038 | Photoemission Studies on BNL/AES/JLab all Niobium, Superconducting RF Injector | 2556 |
|
||
|
Funding: Under contract with the U.S. DOE, Contract No. DE-AC02-98CH10886. Photoemission from all niobium superconducting injector is of considerable interest for the development of higher average current electron sources. In the past year, we have generated photocurrent from such an injector by irradiating the back wall of the 1/2 cell cavity with 248 nm and 266 nm laser beams. In this paper, we present the results of these measurements including the quantum efficiency, and its dependence on the field and wavelength. Issues related to the quenching of the cavity by the laser radiation will also be addressed. |
||
| TPAP043 | Electron Cooling of RHIC | 2741 |
|
||
|
We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/.
Under contract with the U.S. Department of Energy, Contract Number DE-AC02-98CH10886. |
||
| TPPP043 | ERL Based Electron-Ion Collider eRHIC | 2768 |
|
||
|
Funding: Work performed under Contract Number DE-AC02-98CH10886 with the auspices of the US Department of Energy. We present the designs of a future polarized electron-hadron collider, eRHIC* based on a high current super-conducting energy-recovery linac (ERL) with energy of electrons up to 20 GeV. We plan to operate eRHIC in both dedicated (electron-hadrons only) and parallel(with the main hadron-hadron collisions) modes. The eRHIC has very large tunability range of c.m. energies while maintaining very high luminosity up to 1034 cm-2 s-1 per nucleon. Two of the most attractive features of this scheme are full spin transparency of the ERL at all operational energies and the capability to support up to four interaction points. We present two main layouts of the eRHIC, the expected beam and luminosity parameter, and discuss the potential limitation of its performance. *http://www.agsrhichome.bnl.gov/eRHIC/, Appendix A: Linac-Ring Option. |
||
| WPAP033 | State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL) | 2292 |
|
||
|
Funding: This work is supported by NAVSEA, NSWC Crane, the Office of Naval Research, the DOD Joint Technology Office and by the U.S. DOE. A key technology issue of ERL devices for high-power free-electron laser (FEL) and 4th generation light sources is the demonstration of reliable, high-brightness, high-power injector operation. Ongoing programs that target up to 1 Ampere injector performance at emittance values consistent with the requirements of these applications are described. We consider that there are three possible approaches that could deliver the required performance. The first is a DC photocathode gun and superconducting RF (SRF) booster cryomodule. Such a 750 MHz device is being integrated and will be tested up to 100 mA at the Thomas Jefferson National Accelerator Facility beginning in 2007. The second approach is a high-current normal-conducting RF photoinjector. A 700 MHz gun will undergo thermal test in 2006 at the Los Alamos National Laboratory, which, if successful, when equipped with a suitable cathode, would be capable of 1 Ampere operation. The last option is an SRF gun. A half-cell 703 MHz SRF gun capable of delivering 1.0 Ampere will be tested to 0.5 Ampere at the Brookhaven National Laboratory in 2006. The fabrication status, schedule and projected performance for each of these state-of-the-art injector programs will be presented. |
||
| RPPT022 | Optics for High Brightness and High Current ERL Project at BNL | 1775 |
|
||
|
Funding: Work performed under the auspices of the U.S. Department of Energy and partially funded by the US Department of Defence An energy recovery linac (ERL), under development at Brookhaven National Laboratory [1,2], will push ERLs further towards high current and high brightness beams. This R&D ERL will operate in two modes: a high current mode and a high charge mode. In this paper we present a lattice of the machine and PARMELA simulations from the cathode to the beam dump. We discuss the design considerations and present main parameters for various modes of operation. |
||
| RPPE009 | Extremely High Current, High-Brightness Energy Recovery Linac | 1150 |
|
||
|
Funding: Under contract with the U.S. Department of Energy, U.S. DOD Office of Naval Research and Joint Technology Office. Next generation ERL light-sources, high-energy electron coolers, high-power Free-Electron Lasers, powerful Compton X-ray sources and many other accelerators were made possible by the emerging technology of high-power, high-brightness electron beams. In order to get the anticipated performance level of ampere-class currents, many technological barriers are yet to be broken. BNL’s Collider-Accelerator Department is pursuing some of these technologies for its electron cooling of RHIC application, as well as a possible future electron-hadron collider. We will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun and an accelerator cavity capable of producing low emittance (about 1 micron rms normalized) one nano-Coulomb bunches at currents of the order of one ampere average. |
||
| RPPT032 | High Current Energy Recovery Linac at BNL | 2242 |
|
||
|
Funding: Work performed under Contract Number DE-AC02-98CH10886 with the auspices of the U.S. Department of Energy. We present the design and the parameters of a small Energy Recovery Linac (ERL) facility, which is under construction at BNL. This R&D facility has goals to demonstrate CW operation of ERL with average beam current in the range of 0.1 - 1 ampere, combined with very high efficiency of energy recovery. The possibility for future up-grade to a two-pass ERL is being considered. The heart of the facility is a 5-cell 703.75 MHz super-conducting RF linac with HOM damping. Flexible lattice of ERL provides a test-bed for testing issues of transverse and longitudinal instabilities and diagnostics of intense CW e-beam. We present the status and plans for this facility. |