A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Dodson, G.W.

Paper Title Page
TPPT039 Installation and Testing for Commissioning of Normal Conducting RF Linac Segment in the SNS 2571
 
  • Y.W. Kang, A.V. Aleksandrov, D.E. Anderson, M.M. Champion, M. Champion, M.T. Crofford, C. Deibele, G.W. Dodson, R.E. Fuja, P.E. Gibson, P.A. Gurd, T.W. Hardek, G.A. Johnson, P. Ladd, H. Ma, M.P. McCarthy, M.F. Piller, J.Y. Tang, A.V. Vassioutchenko, D.C. Williams
    ORNL, Oak Ridge, Tennessee
  • J.A. Billen, J.T. Bradley, D. Rees, W. Roybal, J. Stovall, K.A. Young, L.M. Young
    LANL, Los Alamos, New Mexico
  
  The Spallation Neutron Source (SNS) linac employs both normal conducting and superconducting linac cavities that will inject a 1.0 GeV proton beam into its accumulator ring. The normal conducting segment of this linac accelerates the beam to 185 MeV and employs one RFQ and six DTL cavities powered by seven 2.5 MW, 402.5 MHz klystrons and four CCL modules powered by four 5.0 MW, 805 MHz klystrons. Installation and RF conditioning of the RF equipment for normal conducting linac segment have been completed at ORNL with the support of LANL experts. After conditioning the accelerating structures, the linac has been successfully commissioned with beam. This paper reviews the experience in installation, RF conditioning, and commissioning of the normal conducting linac accelerating structures and RF subsystems. Checkout and operation of the RF systems and structures including conditioning procedure establishment and test results compared to the RF design specifications will be discussed.

SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

 
WPAE038 Resonance Control Cooling System Performance and Developments 2541
 
  • P.E. Gibson, A.V. Aleksandrov, M.M. Champion, G.W. Dodson, J.P. Schubert, J.Y. Tang
    ORNL, Oak Ridge, Tennessee
  
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

The Spallation Neutron Source (SNS) is an accelerator-based neutron source being built at Oak Ridge National Laboratory. The warm linac portion, designed by Los Alamos, has been installed and commissioned. The warm linac is comprised of six Drift Tube Linac (DTL) tanks and four Coupled Cavity Linac (CCL) modules. For commissioning purposes the accelerating systems have been operated at less than the design 6% duty factor. During lower power operation there is less RF cavity heating. This decrease in heat load causes operational stability issues for the associated Resonance Control Cooling Systems (RCCSs) which were designed for full duty factor operation. To understand this effect operational results have been analyzed and tests have been performed. External system factors have been explored and the resulting impacts defined. Dynamic modeling of the systems has been done via a collaboration with the Institute for Nuclear Research (INR), Moscow, Russia. New RCCS operation code has been implemented. Increases in system performance achieved and solutions employed will be presented.

 
WPAE042 Beam Loss and Residual Activation Trending 2726
 
  • G.W. Dodson, M. Giannella, A.T. Ruffin, T.L. Williams
    ORNL, Oak Ridge, Tennessee
  
  Funding: This work was supported by SNS through UT-Batelle, LLC, under contract DE-AC05-00OR22725 for the U.S. DOE. The SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

The SNS Front End, Drift Tube Linac and most of the Coupled Cavity Linac have been operated during commissioning. Beam loss data were taken with differential Beam Current Monitors, and Beam loss Monitors during commissioning. Residual activation data were taken at various times during and after the run. An analysis of beam loss trending, beam loss monitor data and residual activation will be shown.

 
FPAE033 Operational Availability of the SNS During Commissioning 2289
 
  • G.W. Dodson, T.L. Williams
    ORNL, Oak Ridge, Tennessee
  
  Funding: This work was supported by SNS through UT-Batelle, LLC, under contract DE-AC05-00OR22725 for the U.S. DOE. The SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

The SNS Front End, Drift Tube Linac and most of the Coupled Cavity Linac have been operated during commissioning. Operating statistics were taken and used by system owners to target developments to improve accelerator availability. This progression will be shown along with the overall availability goals of the SNS and a RAM calculation showing the system and subsystem availability required to meet these goals.

 
FPAE057 Beam Dynamics Studies and Beam Quality in the SNS Normal-Conducting Linac 3381
 
  • S. Henderson, A.V. Aleksandrov, D.A. Bartkoski, C. Chu, S.M. Cousineau, V.V. Danilov, G.W. Dodson, J. Galambos, D.-O. Jeon, M.A. Plum, M.P. Stockli
    ORNL, Oak Ridge, Tennessee
  
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos and Oak Ridge.

The Spallation Neutron Source accelerator systems will provide a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron production. The accelerator complex consists of an H- injector capable of producing 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The linear accelerator consists of a Drift Tube Linac, a Coupled-Cavity Linac and a Superconducting Linac which provide 1.5 mA average current to the accumulator ring. The staged beam commissioning of the accelerator complex is proceeding as component installation progresses. Recently, the normal-conducting linear accelerator was beam commissioned. A number of beam dynamics and beam quality measurements will be reported, including the measurement of transverse emittances in the H- injector, and the evolution of halo and emittance along the linac.