A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Chakrabarti, A.

Paper Title Page
TOPD001 SC Cyclotron and RIB Facilities in Kolkata 89
 
  • B. Sinha, R.K. Bhandari, A. Chakrabarti
    DAE/VECC, Calcutta
 
  The superconducting cyclotron under construction at this Centre has bending limit (K-bend) of 520 and focusing limit (K-foc) of 160. It is being constructed, primarily, for nuclear physics experiments with heavy ion beams at intermediate energies. The 100-ton main magnet is currently in the commissioning phase with the main coil already at 4.2K temperature. Magnetic field measurements will be carried out over the next several months. All other systems of the cyclotron are in an advanced stage of fabrication or development. We plan to start assembly of the complete cyclotron around the end of 2005. In the phase-I of the project one beam line has been provided. Construction of three more beam lines and various experimental facilities for nuclear physics as well as irradiation experiments has also been funded and the work is well on its way. An ISOL type Radioactive Ion Beam (RIB) facility is being built with the existing K=130 room temperature cyclotron, VEC, as the primary beam source. In-beam RIB production as well as release measurements have been initiated using the VEC beam. The two-ion-source charge breeder consists of a surface ion source and a 6.4 GHz ECR source. The latter has been commissioned. A low beta RFQ to accelerate RIBs to 86 keV/u energy is being fabricated and the cold model tests completed. Design of first three linac tanks, for acceleration up to 400 keV/u, has been finalized and cold model for the first tank has been fabricated. In this talk status of both the projects will be presented.  
TOPD004 RIB Facility at VECC Kolkata–A Status Report 395
 
  • A. Chakrabarti, R.K. Bhandari
    DAE/VECC, Calcutta
 
  The status of the Radioactive Ion Beam (RIB) facility being built at VECC, Kolkata will be presented. The facility is being built around the existing K=130 cyclotron and will be installed in one of the existing experimental caves. The scheme is to use proton and alpha particles from the cyclotron on a thick production target placed inside an integrated surface ion-source. Radioactive ions with charge state q=1+ extracted from the target-ion-source are to be injected into an on-line ECRIS "charge breeder" for further ionization to q=n+. The 1keV/u, q/A=1/16, RIB of interest will be selected in an isotope separator downstream of the ECRIS and accelerated initially to about 86 keV/u in a Radio Frequency Quadrupole (RFQ) linac and subsequently to about 400 keV/u in three IH-Linac tanks. Since RIB development is R&D intensive, it has been decided to build at first all the basic building blocks and to carry out simultaneously thick target R&D and release measurements using the existing He-jet ISOL facility. Future expansion for further upgradation of energy has been planned. The design of the facility and some recent results will be presented.