| Paper | Title | Page |
|---|---|---|
| TPPE041 | Multi-Alkali Photocathode Development at Brookhaven National Lab for Application in Superconducting Photoinjectors | 2672 |
|
||
| In this paper we will report our progress on the development of cesium potassium antimonide photocathodes and their application in superconducting photoinjectors. Quantum efficiencies of 2-3 % at 545 nm, and 10% at 365 nm have been routinely obtained in the test stand, and electron emission uniformity, quantum efficiency at a variety of wavelengths, and lifetime under different vacuum conditions has been well characterized. The extraction of high charge per laser pulse will also be addressed in addition to the comparison of results from two different deposition techniques. | ||
| TPPE042 | Study of Secondary Emission Enhanced Photoinjector | 2711 |
|
||
| The secondary emission enhanced photoinjector (SEEP) is a very promising new approach to the generation of high-current, high-brightness electron beams. Primary electrons with a few thousand electron-volts of energy strike a specially prepared diamond window. The large Secondary Electron Yield (SEY) provides a multiplication of the number of electrons by about two orders of magnitude. The secondary electrons drift through the diamond under an electric field and emerge into the accelerating proper of the “gun” through a Negative Electron Affinity (NEA) surface of the diamond (Hydrogen terminated). We present the calculation of heating power sources and the temperature distribution in details. Some properties of the secondary electron beam related to beam dynamics are also reported. The results show feasibility of this kind of cathode. | ||
| TPPE061 | RF Design and Operating Performance of the BNL/AES 1.3 GHz Single Cell Superconducting RF Photocathode Electron Gun | 3514 |
|
||
|
Over the past several years Advanced Energy Systems and BNL have been collaborating on the development and testing of a fully superconducting photocathode electron gun. Over the past year we have begun to realize significant results which have been published elsewhere.* This paper will review the RF design of the gun under test and present results of its performance under various operating conditions. Results for cavity quality factor will be presented for various operating temperatures and cavity field gradients. We will discuss various methods of determining the cavity fields and the extent of agreement between them. We will also discuss future plans for testing using this gun.
*Photoemission studies on BNL/AES all niobium, Superconducting RF injector, T. Rao, these proceedings. |
||
| WPAP033 | State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL) | 2292 |
|
||
|
Funding: This work is supported by NAVSEA, NSWC Crane, the Office of Naval Research, the DOD Joint Technology Office and by the U.S. DOE. A key technology issue of ERL devices for high-power free-electron laser (FEL) and 4th generation light sources is the demonstration of reliable, high-brightness, high-power injector operation. Ongoing programs that target up to 1 Ampere injector performance at emittance values consistent with the requirements of these applications are described. We consider that there are three possible approaches that could deliver the required performance. The first is a DC photocathode gun and superconducting RF (SRF) booster cryomodule. Such a 750 MHz device is being integrated and will be tested up to 100 mA at the Thomas Jefferson National Accelerator Facility beginning in 2007. The second approach is a high-current normal-conducting RF photoinjector. A 700 MHz gun will undergo thermal test in 2006 at the Los Alamos National Laboratory, which, if successful, when equipped with a suitable cathode, would be capable of 1 Ampere operation. The last option is an SRF gun. A half-cell 703 MHz SRF gun capable of delivering 1.0 Ampere will be tested to 0.5 Ampere at the Brookhaven National Laboratory in 2006. The fabrication status, schedule and projected performance for each of these state-of-the-art injector programs will be presented. |
||
| WPAP038 | Photoemission Studies on BNL/AES/JLab all Niobium, Superconducting RF Injector | 2556 |
|
||
|
Funding: Under contract with the U.S. DOE, Contract No. DE-AC02-98CH10886. Photoemission from all niobium superconducting injector is of considerable interest for the development of higher average current electron sources. In the past year, we have generated photocurrent from such an injector by irradiating the back wall of the 1/2 cell cavity with 248 nm and 266 nm laser beams. In this paper, we present the results of these measurements including the quantum efficiency, and its dependence on the field and wavelength. Issues related to the quenching of the cavity by the laser radiation will also be addressed. |
||
| TPAP043 | Electron Cooling of RHIC | 2741 |
|
||
|
We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/.
Under contract with the U.S. Department of Energy, Contract Number DE-AC02-98CH10886. |
||
| RPPE009 | Extremely High Current, High-Brightness Energy Recovery Linac | 1150 |
|
||
|
Funding: Under contract with the U.S. Department of Energy, U.S. DOD Office of Naval Research and Joint Technology Office. Next generation ERL light-sources, high-energy electron coolers, high-power Free-Electron Lasers, powerful Compton X-ray sources and many other accelerators were made possible by the emerging technology of high-power, high-brightness electron beams. In order to get the anticipated performance level of ampere-class currents, many technological barriers are yet to be broken. BNL’s Collider-Accelerator Department is pursuing some of these technologies for its electron cooling of RHIC application, as well as a possible future electron-hadron collider. We will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun and an accelerator cavity capable of producing low emittance (about 1 micron rms normalized) one nano-Coulomb bunches at currents of the order of one ampere average. |
||
| RPPE032 | Measurement of the Secondary Emission Yield of a Thin Diamond Window in Transmission Mode | 2251 |
|
||
| The secondary emission enhanced photoinjector (SEEP) is a promising new approach to the generation of high-current, high-brightness electron beams. A low current primary electron beam with energy of a few thousand electron-volts strikes a specially prepared diamond window which emits secondary electrons with a current two orders of magnitude higher. The secondary electrons are created at the back side of the diamond and drift through the window under the influence of a strong electrical field. A hydrogen termination at the exit surface of the window creates a negative electron affinity (NEA) which allows the electrons to leave the diamond. An experiment was performed to measure the secondary electron yield and other properties. The results are discussed in this paper. | ||
| RPPT032 | High Current Energy Recovery Linac at BNL | 2242 |
|
||
|
Funding: Work performed under Contract Number DE-AC02-98CH10886 with the auspices of the U.S. Department of Energy. We present the design and the parameters of a small Energy Recovery Linac (ERL) facility, which is under construction at BNL. This R&D facility has goals to demonstrate CW operation of ERL with average beam current in the range of 0.1 - 1 ampere, combined with very high efficiency of energy recovery. The possibility for future up-grade to a two-pass ERL is being considered. The heart of the facility is a 5-cell 703.75 MHz super-conducting RF linac with HOM damping. Flexible lattice of ERL provides a test-bed for testing issues of transverse and longitudinal instabilities and diagnostics of intense CW e-beam. We present the status and plans for this facility. |