| Paper | Title | Page |
|---|---|---|
| TPPP013 | Simulations of Parametric Resonance Ionization Cooling of Muon Beams | 1321 |
|
||
|
Funding: This work was supported in part by DOE SBIR grants DE-FG02-03ER83722, and 04ER84016. The technique of using a parametric resonance to allow better ionization cooling is being developed to create small beams so that high collider luminosity can be achieved with fewer muons. In the linear channel that is studied in this effort, a half integer resonance is induced such that the normal elliptical motion of particles in x-x' phase space becomes hyperbolic, with particles moving to smaller x and larger x' as they pass down the channel. Thin absorbers placed at the focal points of the channel then cool the angular divergence of the beam by the usual ionization cooling mechanism where each absorber is followed by RF cavities. Thus the phase space of the beam is compressed in transverse position by the dynamics of the resonance and its angular divergence is compressed by the ionization cooling mechanism. We report the first results of simulations of this process, including comparisons to theoretical cooling rates and studies of sensitivity to variations in absorber thickness and initial beam conditions. |
||
| TPPP015 | ELIC at CEBAF | 1437 |
|
||
|
Funding: Work supported by DOE Contract DE-AC05-84ER40150. We report on the progress of the conceptual development of the energy recovering linac (ERL)-based Electron-Light Ion Collider (ELIC) at CEBAF that is envisioned to reach luminosity level of 1033-1035 /cm2s with both beams polarized to perform a new class of experiments in fundamental nuclear physics. Four interaction points with all light ion species longitudinally or transversally polarized and fast flipping of the spin for all beams are planned. The unusually high luminosity concept is based on the use of the ERL and circulator ring-based electron cooling and crab crossing colliding beams. Our recent studies concentrate on the design of low beta interaction points with crab-crossing colliding beams, the exploration on raising the polarized electron injector current to the level of 3-30 mA with the use of electron circulator-collider ring, forming a concept of stacking and cooling of the ion beams, specifications of the electron cooling facility, and studies of beam-beam interaction and intra-beam scattering. |
||
| TPPP016 | Beam Physics for the 12 GeV CEBAF Upgrade Project | 1482 |
|
||
|
Funding: Work supported by DOE Contract DE-AC05-84ER40150. Beam physics aspects of the 12 GeV Upgrade of CEBAF are presented. The CEBAF Upgrade to 12 GeV is achieved via 5.5 recirculations through the linacs, and the installation of 10 new high-gradient cryomodules. A new experimental hall, Hall D, is envisioned at the end of North Linac. Simulation results for straight-through and recirculated injectors are summarized and compared. Beam transport designs are discussed and evaluated with respect to matching and beam breakup (BBU) optimization. Effects of synchrotron radiation excitation on the beam properties are calculated. BBU simulations and derived specifications for the damping of higher order modes of the new 7-cell cavities are presented. The energies that provide longitudinal polarization in multiple experimental halls simultaneously are calculated. Finally, a detailed optics design for the Hall D transport line has been obtained. |
||
| TPPP044 | Interaction Region Design for the Electron-Light Ion Collider ELIC | 2824 |
|
||
|
Funding: Work performed under the auspices of the US Department of Energy. The Electron-Light Ion Collider ELIC proposed by Jefferson Lab aims at very high luminosities for collisions of 150 GeV protons on 7 GeV electrons. To achieve these high luminosities, very strong low-beta focusing of low-emittance beams is required. Taking advantage of the unequal design proton beam emittances in the two transverse planes, an interaction region design based on superconducting quadrupole doublets has been deveoped. Compared with the original design, this scheme provides larger beam apertures at lower magnetic fields, while potentially doubling the luminosity. |
||
| TPPP052 | Simulations of a Gas-Filled Helical Muon Beam Cooling Channel | 3215 |
|
||
|
Funding: This work was supported in part by DOE STTR/SBIR grants DE-FG02-02ER86145 and 03ER83722. A helical cooling channel (HCC) has been proposed to quickly reduce the six-dimensional phase space of muon beams for muon colliders, neutrino factories, and intense muon sources. The HCC is composed of a series of RF cavities filled with dense hydrogen gas that acts as the energy absorber for ionization cooling and suppresses RF breakdown in the cavities. Magnetic solenoidal, helical dipole, and helical quadrupole coils outside of the RF cavities provide the focusing and dispersion needed for the emittance exchange for the beam as it follows a helical equilibrium orbit down the HCC. In the work presented here, two Monte Carlo programs have been developed to simulate a HCC to compare with the analytic predictions and to begin the process of optimizing practical designs that could be built in the near future. We discuss the programs, the comparisons with the analytical theory, and the prospects for a HCC design with the capability to reduce the six-dimensional phase space emittance of a muon beam by a factor of over five orders of magnitude in a linear channel less than 100 meters long. |
||
| ROAA005 | Recent Innovations in Muon Beam Cooling and Prospects for Muon Colliders | 419 |
|
||
|
Funding: This work was supported in part by DOE SBIR/STTR grants DE-FG02-02ER86145, 03ER83722, 04ER84015, 04ER86191, and 04ER84016. A six-dimensional(6D)cooling channel based on helical magnets surrounding RF cavities filled with dense hydrogen gas* is used to achieve the small transverse emittances demanded by a high-luminosity muon collider. This helical cooling channel**(HCC) has solenoidal, helical dipole, and helical quadrupole magnetic fields to generate emittance exchange. Simulations verify the analytic predictions and have shown a 6D emittance reduction of over 3 orders of magnitude in a 100 m HCC segment. Using three such sequential HCC segments, where the RF frequencies are increased and transverse dimensions reduced as the beams become cooler, implies a 6D emittance reduction of almost six orders of magnitude. After this, two new post-cooling ideas can be employed to reduce transverse emittances to one or two mm-mr, which allows high luminosity with fewer muons than previously imagined. In this report we discuss the status of and the plans for the HCC simulation and engineering efforts. We also describe the new post-cooling ideas and comment on the prospects for a Higgs factory or energy frontier muon collider using existing laboratory infrastructure. *R. P. Johnson et al. LINAC2004, www.muonsinc.com/TU203.pdf. **Y. Derbenev and R.P. Johnson, Submitted to PRSTAB, http://www-mucool.fnal.gov/mcnotes/public/pdf/muc0284/muc0284.pdf. |