Paper | Title | Page |
---|---|---|
TUB3CO04 | A New Thermionic RF Electron Gun for Synchrotron Light Sources | 453 |
|
||
Funding: This work is supported by the U.S. Department of Energy, Office of Basic Energy Science, under contract DE-SC0015191 and contract No. DE-AC02-06CH11357. A thermionic RF gun is a compact and efficient source of electrons used in many practical applications. RadiaBeam Systems and the Advanced Photon Source of Argonne National Laboratory collaborate in developing of a reliable and robust thermionic RF gun for synchrotron light sources which would offer substantial improvements over existing thermionic RF guns and allow stable operation with up to 1A of beam peak current at a 100 Hz pulse repetition rate and a 1.5 μs RF pulse length. In this paper, we discuss the electromagnetic and engineering design of the cavity, and report the progress towards high power tests of the cathode assembly of the new gun. |
||
![]() |
Slides TUB3CO04 [2.661 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUB3CO04 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOA12 | Interleaving Lattice Design for APS Linac | 713 |
|
||
In order to realize and test advanced accelerator concepts and hardware, the existing beamline with both old and new components are being reconfigured in Linac Extension Area (LEA) of APS linac. Photo injector, which had been installed in the beginning of APS linac, will provide low emittance electron beam into the LEA. The thermionic RF gun beam for storage ring and photo-cathode RF gun beam for LEA will be operated though the LINAC in an interleaved fashion. In this presentation, technical issues as well as beam dynamics on the design for interleaving operation will be described. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOA12 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOB48 | THz and Sub-THz Capabilities of a Table-Top Radiation Source Driven by an RF Thermionic Electron Gun | 998 |
|
||
Funding: This work was supported by the U.S. Department of Energy (award No. DE-SC-FOA-0007702). Design features and experimental results are presented for a sub-mm wave source [1] based on APS RF thermionic electron gun. The setup includes compact alpha-magnet, quadrupoles, sub-mm-wave radiators, and THz optics. The sub-THz radiator is a planar, oversized structure with gratings. Source upgrade for generation frequencies above 1 THz is discussed. The THz radiator will use a short-period undulator having 1 T field amplitude, ~20 cm length, and integrated with a low-loss oversized waveguide. Both radiators are integrated with a miniature horn antenna and a small ~90°-degree in-vacuum bending magnet. The electron beamline is designed to operate different modes including conversion to a flat beam interacting efficiently with the radiator. The source can be used for cancer diagnostics, surface defectoscopy, and non-destructive testing. Sub-THz experiment demonstrated a good potential of a robust, table-top system for generation of a narrow bandwidth THz radiation. This setup can be considered as a prototype of a compact, laser-free, flexible source capable of generation of long trains of Sub-THz and THz pulses with repetition rates not available with laser-driven sources. [1] A. V. Smirnov, R. Agustsson, W. J. Berg et al., Phys. Rev. ST Accel. Beams 18, 090703(2015) |
||
![]() |
Poster WEPOB48 [1.335 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB48 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |