NAPAC2016 - List of Authors (Jing, Y.C.)

Paper	Title	Page
WEPOB59	Performance of CEC Pop Gun During Commissioning	1024
	I. Pinayev, W. Fu, Y. Hao, M. Harvey, T. Hayes, J.P. Jamilkowski, Y.C. Jing, P. K. Kankiya, D. Kayran, R. Kellermann, V. Litvinenko, G.J. Mahler, M. Mapes, K. Mernick, K. Mihara, T.A. Miller, G. Narayan, M.C. Paniccia, W.E. Pekrul, T. Rao, F. Severino, B. Sheehy, J. Skaritka, K.S. Smith, J.E. Tuozzolo, E. Wang, G. Wang, W. Xu, A. Zaltsman, Z. Zhao BNL, Upton, Long Island, New York, USA I. Petrushina SUNY SB, Stony Brook, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The Coherent Electron Cooling Proof-of-Principle (CeC PoP) experiment employs a high-gradient CW photo-injector based on the superconducting RF cavity. Such guns operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray and gamma ray sources, high luminosity hadron colliders, nuclear waste transmutation or a new generation of microchip production. In this paper we report on our operation of a superconducting RF electron gun with a high accelerating gradient at the CsK2Sb photo-cathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (above 4 nC). We give short description of the system and then detail our experimental results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB59
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOB60	Commissioning of CeC PoP Accelerator	1027
	I. Pinayev, Z. Altinbas, J.C.B. Brutus, A.J. Curcio, A. Di Lieto, C. Folz, W. Fu, D.M. Gassner, Y. Hao, M. Harvey, T. Hayes, R.L. Hulsart, J.P. Jamilkowski, Y.C. Jing, P. K. Kankiya, D. Kayran, R. Kellermann, V. Litvinenko, G.J. Mahler, M. Mapes, K. Mernick, R.J. Michnoff, K. Mihara, T.A. Miller, G. Narayan, P. Orfin, M.C. Paniccia, D. Phillips, T. Rao, F. Severino, B. Sheehy, J. Skaritka, L. Smart, K.S. Smith, V. Soria, Z. Sorrell, R. Than, J.E. Tuozzolo, E. Wang, G. Wang, B. P. Xiao, W. Xu, A. Zaltsman, Z. Zhao BNL, Upton, Long Island, New York, USA I. Petrushina SUNY SB, Stony Brook, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Coherent electron cooling is new cooling technique to be tested at BNL. Presently we are in the commissioning stage of the accelerator system. In this paper we present status of various systems and achieved beam parameters as well as operational experience. Near term future plans are also discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB60
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOB67	K2CsSb Photocathode Performance in QWR SRF Gun	1042
	E. Wang, Y. Hao, Y.C. Jing, V. Litvinenko, I. Pinayev, T. Rao, J. Skaritka, G. Wang, T. Xin BNL, Upton, Long Island, New York, USA
	In 2016 run of Coherent Electron Cooling, we have successfully tested the performance of a number of K2CsSb cathodes. These cathodes with QE of 6%-10% were fabricated in Instrumentation Division, a few miles away, transported to RHIC tunnel under UHV conditions, attached to the CeC gun, kept in storage, and inserted in the gun as needed. A maximum bunch charge of 4.6 nC was generated in the gun when the QE was 1.8 %. With careful conditioning at increasing accelerating fields, it was possible to maintain the QE of several cathodes for more than a week. For the cathodes that experienced degradation, the primary cause was multipacting when the power into the gun was increased. In the initial runs, the entire 20 mm substrate face was coated with the cathode material causing cathode induced multipacting. For subsequent measurements, the substrate was masked to coat only the central 9 mm of the substrate. By optimizing the procedure for boosting the power to the gun and covering all viewports to minimize dark current, we were able to minimize QE degradation. In this paper we discuss the cathode preparation, transfer to the gun and operational experience with the cathodes in 112 MHz gun.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB67
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Performance of CEC Pop Gun During Commissioning

1024

I. Pinayev, W. Fu, Y. Hao, M. Harvey, T. Hayes, J.P. Jamilkowski, Y.C. Jing, P. K. Kankiya, D. Kayran, R. Kellermann, V. Litvinenko, G.J. Mahler, M. Mapes, K. Mernick, K. Mihara, T.A. Miller, G. Narayan, M.C. Paniccia, W.E. Pekrul, T. Rao, F. Severino, B. Sheehy, J. Skaritka, K.S. Smith, J.E. Tuozzolo, E. Wang, G. Wang, W. Xu, A. Zaltsman, Z. Zhao
BNL, Upton, Long Island, New York, USA
I. Petrushina
SUNY SB, Stony Brook, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The Coherent Electron Cooling Proof-of-Principle (CeC PoP) experiment employs a high-gradient CW photo-injector based on the superconducting RF cavity. Such guns operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray and gamma ray sources, high luminosity hadron colliders, nuclear waste transmutation or a new generation of microchip production. In this paper we report on our operation of a superconducting RF electron gun with a high accelerating gradient at the CsK2Sb photo-cathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (above 4 nC). We give short description of the system and then detail our experimental results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB59

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOB60

Commissioning of CeC PoP Accelerator

1027

I. Pinayev, Z. Altinbas, J.C.B. Brutus, A.J. Curcio, A. Di Lieto, C. Folz, W. Fu, D.M. Gassner, Y. Hao, M. Harvey, T. Hayes, R.L. Hulsart, J.P. Jamilkowski, Y.C. Jing, P. K. Kankiya, D. Kayran, R. Kellermann, V. Litvinenko, G.J. Mahler, M. Mapes, K. Mernick, R.J. Michnoff, K. Mihara, T.A. Miller, G. Narayan, P. Orfin, M.C. Paniccia, D. Phillips, T. Rao, F. Severino, B. Sheehy, J. Skaritka, L. Smart, K.S. Smith, V. Soria, Z. Sorrell, R. Than, J.E. Tuozzolo, E. Wang, G. Wang, B. P. Xiao, W. Xu, A. Zaltsman, Z. Zhao
BNL, Upton, Long Island, New York, USA
I. Petrushina
SUNY SB, Stony Brook, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Coherent electron cooling is new cooling technique to be tested at BNL. Presently we are in the commissioning stage of the accelerator system. In this paper we present status of various systems and achieved beam parameters as well as operational experience. Near term future plans are also discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB60

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOB67

K2CsSb Photocathode Performance in QWR SRF Gun

1042

E. Wang, Y. Hao, Y.C. Jing, V. Litvinenko, I. Pinayev, T. Rao, J. Skaritka, G. Wang, T. Xin
BNL, Upton, Long Island, New York, USA

In 2016 run of Coherent Electron Cooling, we have successfully tested the performance of a number of K2CsSb cathodes. These cathodes with QE of 6%-10% were fabricated in Instrumentation Division, a few miles away, transported to RHIC tunnel under UHV conditions, attached to the CeC gun, kept in storage, and inserted in the gun as needed. A maximum bunch charge of 4.6 nC was generated in the gun when the QE was 1.8 %. With careful conditioning at increasing accelerating fields, it was possible to maintain the QE of several cathodes for more than a week. For the cathodes that experienced degradation, the primary cause was multipacting when the power into the gun was increased. In the initial runs, the entire 20 mm substrate face was coated with the cathode material causing cathode induced multipacting. For subsequent measurements, the substrate was masked to coat only the central 9 mm of the substrate. By optimizing the procedure for boosting the power to the gun and covering all viewports to minimize dark current, we were able to minimize QE degradation. In this paper we discuss the cathode preparation, transfer to the gun and operational experience with the cathodes in 112 MHz gun.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB67

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)