NAPAC2016 - List of Authors (Barcikowski, A.)

Paper	Title	Page
WEPOB24	Preliminary Test Results of a Prototype Fast Kicker for APS MBA Upgrade	950
	C. Yao, A. Barcikowski, A.R. Brill, J. Carwardine, T.K. Clute, Z.A. Conway, A.R. Cours, G. Decker, R.T. Keane, F. Lenkszus, L.H. Morrison, X. Sun, J. Wang, F. Westferro, A. Xiao ANL, Argonne, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. The APS multi-bend achromatic (MBA) upgrade storage ring plans to support two bunch fill patterns: a 48-bunch and a 324-bunch. A "swap out" injection scheme is required. In order provide the required kick to injected beam, to minimize the beam loss and residual oscillation of injected beam, and to minimize the perturbation to stored beam during injection, the rise, fall, and flat-top parts of the kicker pulse must be within a 16.9-ns interval. Stripling-type kickers are chosen for both injection and extraction. We developed a prototype kicker that supports a ±15kV differential pulse voltage. We performed high voltage discharge, TDR measurement, high voltage pulse test and beam test of the kicker. We report the design of the fast kicker and the test results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB24
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary Test Results of a Prototype Fast Kicker for APS MBA Upgrade

950

C. Yao, A. Barcikowski, A.R. Brill, J. Carwardine, T.K. Clute, Z.A. Conway, A.R. Cours, G. Decker, R.T. Keane, F. Lenkszus, L.H. Morrison, X. Sun, J. Wang, F. Westferro, A. Xiao
ANL, Argonne, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
The APS multi-bend achromatic (MBA) upgrade storage ring plans to support two bunch fill patterns: a 48-bunch and a 324-bunch. A "swap out" injection scheme is required. In order provide the required kick to injected beam, to minimize the beam loss and residual oscillation of injected beam, and to minimize the perturbation to stored beam during injection, the rise, fall, and flat-top parts of the kicker pulse must be within a 16.9-ns interval. Stripling-type kickers are chosen for both injection and extraction. We developed a prototype kicker that supports a ±15kV differential pulse voltage. We performed high voltage discharge, TDR measurement, high voltage pulse test and beam test of the kicker. We report the design of the fast kicker and the test results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB24

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)