MEDSI2018 - List of Authors (Narayanan, S.)

Paper	Title	Page
THPH26	Mechanical Conversion of a Vertically Reflecting Artificial Channel-cut Monochromator to Horizontally Reflecting	391
	S.P. Kearney, E.M. Dufresne, S. Narayanan, A. Sandy, D. Shu ANL, Argonne, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. The mechanical conversion of a high-resolution artificial channel-cut monochromator (ACCM) from a vertically reflecting orientation to a horizontally reflecting orientation is presented. The ACCM was originally commissioned for the 8-ID-I beamline at the Advanced Photon Source (APS), Argonne National Laboratory [1, 2]. The ACCM was intentionally designed at commission to have the potential to be reoriented to the horizontal direction. After nearly a decade of operation in the vertical orientation the ACCM was rotated to the horizontal orientation. The details of the design which allowed this conversion and the preparation steps needed to assure the continued performance of the ACCM will be discussed. * Narayanan, S., et al., J. Synchrotron Radiat. 15(1), 12-18 (2008). ** U.S. Patent granted No. 6,607, 840, D. Shu, T. S. Toellner, and E. E. Alp, 2003.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-THPH26
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Mechanical Conversion of a Vertically Reflecting Artificial Channel-cut Monochromator to Horizontally Reflecting

391

S.P. Kearney, E.M. Dufresne, S. Narayanan, A. Sandy, D. Shu
ANL, Argonne, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
The mechanical conversion of a high-resolution artificial channel-cut monochromator (ACCM) from a vertically reflecting orientation to a horizontally reflecting orientation is presented. The ACCM was originally commissioned for the 8-ID-I beamline at the Advanced Photon Source (APS), Argonne National Laboratory [1, 2]. The ACCM was intentionally designed at commission to have the potential to be reoriented to the horizontal direction. After nearly a decade of operation in the vertical orientation the ACCM was rotated to the horizontal orientation. The details of the design which allowed this conversion and the preparation steps needed to assure the continued performance of the ACCM will be discussed.
* Narayanan, S., et al., J. Synchrotron Radiat. 15(1), 12-18 (2008).
** U.S. Patent granted No. 6,607, 840, D. Shu, T. S. Toellner, and E. E. Alp, 2003.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-THPH26

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)