The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - DePaola, F.A. AU - Faussete, R. AU - Jain, A.K. AU - Jaski, M.S. AU - Sharma, S.K. AU - Spataro, C.J. ED - Schaa, Volker RW ED - Tavakoli, Keihan ED - Tilmont, Manuel TI - Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet J2 - Proc. of MEDSI2018, Paris, France, 25-29 June 2018 C1 - Paris, France T2 - Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation T3 - 10 LA - english AB - An innovative design was developed for an 8-pole corrector magnet for the APS upgrade program. This is a combined function magnet consisting of horizontal and vertical correctors as well as a skew quadrupole. This paper describes technical challenges presented by both the magnetic design and the interface constraints for the magnet. A prototype magnet was built, and extensive testing on the magnet confirmed that all magnetic and mechanical requirements were achieved. Improvements were identified during the manufacturing and testing of the prototype magnet. The final design of the magnet which has incorporated these improvements is discussed in the paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 50 EP - 52 KW - quadrupole KW - vacuum KW - alignment KW - dipole KW - octupole DA - 2018/12 PY - 2018 SN - 978-3-95450-207-3 DO - 10.18429/JACoW-MEDSI2018-TUPH13 UR - http://jacow.org/medsi2018/papers/tuph13.pdf ER -