ANLdownload RIS dataset for institute's DOIs
Argonne, Illinois, USA

DOI Title
10.18429/JACoW-MEDSI2016-MOPE32 Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring
10.18429/JACoW-MEDSI2016-MOPE34 Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring
10.18429/JACoW-MEDSI2016-TUAA01 Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project
10.18429/JACoW-MEDSI2016-TUAA02 Earth, Wind, and Fire: The New Fast Scanning Velociprobe
10.18429/JACoW-MEDSI2016-TUBA01 The Design of a Precision Mechanical Assembly for a Hard X-ray Polarizer
10.18429/JACoW-MEDSI2016-TUBA04 Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution
10.18429/JACoW-MEDSI2016-TUPE08 Finite Element Analysis of a Photon Absorber Based on Volumetric Absorption of the Photon Beam
10.18429/JACoW-MEDSI2016-TUPE25 Metallurgical Evaluation of Dissimilar Metal Joints for Accelerator Vacuum Chamber Construction at the Advanced Photon Source Upgrade Project
10.18429/JACoW-MEDSI2016-TUPE28 Characterization of the Acoustic Field Generated by the Single-Axis Acoustic Levitator
10.18429/JACoW-MEDSI2016-TUPE44 Optimization for the APS-U Magnet Support Structure
10.18429/JACoW-MEDSI2016-WEBA01 Nostradamus and the Synchrotron Engineer: Key Aspects of Predicting Accelerator Structural Response
10.18429/JACoW-MEDSI2016-WEBA04 A Discussion on Utilization of Heat Pipes and Vapour Chamber Technology as a Primary Device for Heat Extraction from Photon Absorber Surfaces
10.18429/JACoW-MEDSI2016-WECA04 Horizontal-Gap Vertically-Polarizing Undulator (HGVPU) Design Challenges and Resolutions
10.18429/JACoW-MEDSI2016-WEPE04 Design of X-Ray Beam Position Monitor for High Heat Load Front Ends of the Advanced Photon Source Upgrade
10.18429/JACoW-MEDSI2016-WEPE14 Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source
10.18429/JACoW-MEDSI2016-WEPE18 APS 2-ID Beamline, Upgrade to Canted Configuration
10.18429/JACoW-MEDSI2016-WEPE28 Minimizing Experimental Setup Time and Effort at Aps Beamline 1-Id Through Instrumentation Design
10.18429/JACoW-MEDSI2016-THAA03 Mechanical Design of New Dual Pinhole Mini-Beam Collimator With Motorized Pitch and Yaw Adjuster Provides Lower Background for X-Ray Crystallography at GMCA@APS