MEDSI2016 - List of Authors (Ubeda Gonzalez, D.)

Paper	Title	Page
FRBA02	The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction	413
	C. Colldelram, J. Nicolás, P. Pedreira, L. Ribó, C. Ruget, I. Sics ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain J.M. Casalta Escuer, C. Martín-Nuño Gonzalez, A. Tomas Justribo, D. Úbeda Gonzalez SENER, Cerdanyola del Vallès, Spain
	Over time X-Ray mirrors are demanded for better focusing, closer to sample refocusing, spot size as well as better beam uniformity at sample position. Based on the experience of ALBA Phase I beam lines a new alter-native design of a mirror bender* is proposed. The system includes two main functionalities: the mirror bender mechanism and mirror figure error correc-tion. Both mechanisms are based on the introduction of a force constrain on the mirror surface instead of a geometrical one. As being based on a force mechanism they could reach high resolution and especially for the correctors which can achieve nanometre resolution. The correctors are designed to provide high force stability in the mirror side, eliminating the crosstalk between bending and figure correction, and minimizing the sensitivity to drifts. With such controlled deformation of the mirror substrate it is possible to obtain the desired surface figure not only to correct mirror figure errors but also to adapt it to the incident wavefront, thus becoming adaptive system. The mechanical solutions are presented which are able to correct mirror surfaces with a resolution of 1 nm reaching slope errors below 100 nrad. * Patent Registered
	Slides FRBA02 [4.766 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-FRBA02
About •	paper received ※ 03 October 2016 paper accepted ※ 08 May 2017 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction

413

C. Colldelram, J. Nicolás, P. Pedreira, L. Ribó, C. Ruget, I. Sics
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
J.M. Casalta Escuer, C. Martín-Nuño Gonzalez, A. Tomas Justribo, D. Úbeda Gonzalez
SENER, Cerdanyola del Vallès, Spain

Over time X-Ray mirrors are demanded for better focusing, closer to sample refocusing, spot size as well as better beam uniformity at sample position. Based on the experience of ALBA Phase I beam lines a new alter-native design of a mirror bender* is proposed. The system includes two main functionalities: the mirror bender mechanism and mirror figure error correc-tion. Both mechanisms are based on the introduction of a force constrain on the mirror surface instead of a geometrical one. As being based on a force mechanism they could reach high resolution and especially for the correctors which can achieve nanometre resolution. The correctors are designed to provide high force stability in the mirror side, eliminating the crosstalk between bending and figure correction, and minimizing the sensitivity to drifts. With such controlled deformation of the mirror substrate it is possible to obtain the desired surface figure not only to correct mirror figure errors but also to adapt it to the incident wavefront, thus becoming adaptive system. The mechanical solutions are presented which are able to correct mirror surfaces with a resolution of 1 nm reaching slope errors below 100 nrad.
* Patent Registered

Slides FRBA02 [4.766 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-FRBA02

About •

paper received ※ 03 October 2016 paper accepted ※ 08 May 2017 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)