MEDSI2016 - List of Authors (Shastri, S.D.)

Paper	Title	Page
WEPE28	Minimizing Experimental Setup Time and Effort at Aps Beamline 1-Id Through Instrumentation Design	353
	E. Benda, J. Almer, P. Kenesei, A. Mashayekhi, J.S. Okasinski, J.S. Park, R. Ranay, S.D. Shastri ANL, Argonne, Illinois, USA
	Sector 1-ID at the APS accommodates a number of different experimental techniques in the same spatial envelope of the E-hutch end station. These include high energy small and wide angle x-ray scattering (SAXS and WAXS), high energy diffraction microscopy (HEDM, both near and far field modes) and X-ray tomography. These techniques are frequently combined to allow the users to obtain multimodal data with 1 um spatial resolution and 0.05° angular resolution. Furthermore, these techniques are utilized while the sample is thermo-mechanically loaded to mimic real operating conditions. The instrumentation required for each of these techniques has been designed and configured in a modular way with a focus on stability and repeatability between changeovers. This not only allows the end station to be used for a greater number of techniques but it also results in a reduction of time and effort typically required for set up and alignment. Key instrumentation design features and layout of the end station are presented.
	Poster WEPE28 [4.640 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WEPE28
About •	paper received ※ 07 September 2016 paper accepted ※ 16 September 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Minimizing Experimental Setup Time and Effort at Aps Beamline 1-Id Through Instrumentation Design

353

E. Benda, J. Almer, P. Kenesei, A. Mashayekhi, J.S. Okasinski, J.S. Park, R. Ranay, S.D. Shastri
ANL, Argonne, Illinois, USA

Sector 1-ID at the APS accommodates a number of different experimental techniques in the same spatial envelope of the E-hutch end station. These include high energy small and wide angle x-ray scattering (SAXS and WAXS), high energy diffraction microscopy (HEDM, both near and far field modes) and X-ray tomography. These techniques are frequently combined to allow the users to obtain multimodal data with 1 um spatial resolution and 0.05° angular resolution. Furthermore, these techniques are utilized while the sample is thermo-mechanically loaded to mimic real operating conditions. The instrumentation required for each of these techniques has been designed and configured in a modular way with a focus on stability and repeatability between changeovers. This not only allows the end station to be used for a greater number of techniques but it also results in a reduction of time and effort typically required for set up and alignment. Key instrumentation design features and layout of the end station are presented.

Poster WEPE28 [4.640 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WEPE28

About •

paper received ※ 07 September 2016 paper accepted ※ 16 September 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)