The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Lee, M.H. AU - Chang, C.H. AU - Chang, C.Y. AU - Chang, S.H. AU - Chen, C. AU - Chiu, C.C. AU - Huang, L. AU - Lai, L. AU - Lee, L. AU - Liu, D.G. AU - Su, Y. AU - Yan, H.Y. ED - Casas, Joan ED - Schaa, Volker RW ED - Costa, Isidre ED - López, David ED - Prieto, Montserrat TI - Developing White Beam Components of TPS Beamline 24A J2 - Proc. of MEDSI2016, Barcelona, Spain, 11-16 September 2016 CY - Barcelona, Spain T2 - Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference T3 - 9 LA - english AB - The TPS 24A, Soft X-ray Tomography (SXT) beamline, is one of the beamlines in the second construction phase at the Taiwan Photon Source (TPS). This bending magnet (BM) beamline has high flux in the range between 260 eV and 2600 eV. It is designed for transmission full-field imaging of frozen-hydrated biological samples. At the exit slit, the beam flux optimized in 520 eV is 282 billion photons/second with resolving power 2000, the beam size is 0.05 mm × 0.06 mm (V × H, FWHM) and the beam divergence is 1.73 mrad × 1.57 mrad (V × H, FWHM). By contributions of the generic beamline components project in recent years, modular mechanisms would be used in this beamline such as mask, X-ray beam position monitor (XBPM), photon absorber (PAB), and screens. However, these beamline components were designed for ID beamlines, so they should be redesigned for BM beamlines. This paper generally introduce these beamline components decided and redesigned for the TPS 24A. They will play important roles at the BM beam-lines in the future. PB - JACoW Publishing CP - Geneva, Switzerland SP - 183 EP - 186 KW - ion KW - simulation KW - shielding KW - laser KW - target DA - 2017/06 PY - 2017 SN - 978-3-95450-188-5 DO - doi:10.18429/JACoW-MEDSI2016-TUPE12 UR - http://jacow.org/medsi2016/papers/tupe12.pdf ER -