Paper | Title | Other Keywords | Page |
---|---|---|---|
TUPO042 | RF Results of Nb Coated SRF Accelerator Cavities via HiPIMS | cavity, SRF, site, lattice | 427 |
|
|||
Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177. Bulk Niobium (Nb) SRF (superconducting radio frequency) cavities are currently the preferred method for acceleration of charged particles at accelerator facilities around the world. Since the SRF phenomena occurs within a shallow depth of 40 nm (for Nb), a proposed option has been to deposit a superconducting Nb thin film on the interior of a cavity made of a suitable alternative material such as copper or aluminum. While this approach has been attempted in the past using DC magnetron sputtering (DCMS), such cavities have never performed at the bulk Nb level. However, new energetic condensation techniques for film deposition offer the opportunity to create suitably thick Nb films with improved density, microstructure and adhesion compared to traditional DCMS. One such technique that has been developed somewhat recently is ’High Power Impulse Magnetron Sputtering’ (HiPIMS). Here we report early results from various thin film coatings carried out on 1.3 GHz Cu Cavities, a 1.5 GHz Nb cavity and small Cu coupon samples coated at Jefferson Lab using HiPIMS. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO042 | ||
About • | paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019 | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||