Paper |
Title |
Other Keywords |
Page |
TUPO051 |
Design Considerations of a Balloon-shaped SSR Superconducting Cavity |
cavity, simulation, electron, superconducting-cavity |
448 |
|
- H.J. Cha, S.W. Jang, E.-S. Kim, K.R. Kim, S. H. Park, J.Y. Yoon
Korea University Sejong Campus, Sejong, Republic of Korea
|
|
|
A single spoke resonator (SSR, β = 0.51 and f = 325 MHz) is being developed at Korea University. It is well-known that a traditional spoke cavity having flat or round end walls has broad multipacting ranges in acceleration gradient, sometimes including operation region. In general, quite long conditioning time is consumed to overcome such multipacting barriers. In this study, we introduce a balloon-shaped SSR superconducting cavity for the multipacting mitigation due to structural simplicity. The electromagnetic modeling of the SSR was made based on the RF parameter optimization. The simulation results show much narrower multipacting bandwidth, compared to those for the traditional spoke cavity. Mechanical analyses with stiffening structure at maximum allowable working pressures indicate acceptable stresses at the SSR cavity wall. In addition, the resonant frequency shifts due to fabrication and processing for cold tests are predicted and power coupling and tuning mechanism are also investigated.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO051
|
|
About • |
paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|