Paper |
Title |
Page |
THPO124 |
Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode |
949 |
|
- T. Asaka, H. Tanaka
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
- Y. Otake
JASRI, Hyogo, Japan
- T. Taniuchi
JASRI/SPring-8, Hyogo-ken, Japan
|
|
|
In recent state-of -arts accelerators like an X-ray free electron laser, the electron beam performance of a linear accelerator demands a low emittance of ~ 2mm mrad. To obtain the low-emittance, such a 500kV thermionic-gun at SACLA and a photocathode rf gun generating 0.5~1MeV electron beams had been developed. Although the photocathode rf gun is compact, it is necessary to prepare a highly stabilized, large and complicated laser system. The 500-kV thermionic-gun of SACLA injector has also to prepare a technically difficult and large high voltage system. Hence, we propose a low-emittance gun system with a low-voltage and grid-loaded 50kV thermionic gun and a 238MHz rf cavity to overcome the complicated difficulty, as extension of the established technology. This system quickly accelerates the electron up to 500keV to preserve the low emittance and to cancel a grid focusing effect by the space charge force of the beam. By using a particle tracking code, we obtained the optimum voltage parameters of the grid and the 238MHz rf for obtaining the above-mentioned low emittance. In this paper, we present a numerical feasibility study to realize the low-emittance gun system.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-THPO124
|
|
About • |
paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|