LINAC2018 - List of Authors (Takahashi, Y.)

Paper	Title	Page
MOPO024	Development of High Power Coherent Terahertz Wave Sources at Lebra 125 MeV Linac in Nihon University	78
	T. Sakai, K. Hayakawa, Y. Hayakawa, K. Nogami, Y. Sumitomo, Y. Takahashi, T. Tanaka LEBRA, Funabashi, Japan H. Ogawa, N. Sei AIST, Tsukuba, Ibaraki, Japan
	Funding: This work was supported by JSPS KAKENHI Grant Number JP16K17539 and JP16H03912. Research and Development of a high performance electron linac for the generation of FEL, Parametric X-ray Radiation (PXR) and THz waves has been continued at the Laboratory for Electron Beam Research and Application (LEBRA) of Nihon University as a joint research with KEK and National Institute of Advanced Industrial Science and Technology. The transport systems of the THz wave were installed in the vacuum chamber on the downstream side of the bending magnet of the PXR and FEL beam-line. The CER and the CSR are generated by the bending magnet each of the beam line. In addition, the CTR using thin metal foil is also generated. The average power of the CTR wave was measured approximately 1 mJ/macro-pulse (pulse width 4.5 µs) near the CTR wave beam source point in the frequency range of 0.1 - 2.5 THz. In addition, the energy of the CER as high as 0.2 mJ/macro-pulse were achieved with the experimental room. Furthermore, CER of the generated the FEL beam line can also be guided from the bending magnet on the downstream side of the undulator without disturbing the FEL oscillations. THz transport beam-lines and the characteristics of the THz waves are discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO024
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of High Power Coherent Terahertz Wave Sources at Lebra 125 MeV Linac in Nihon University

78

T. Sakai, K. Hayakawa, Y. Hayakawa, K. Nogami, Y. Sumitomo, Y. Takahashi, T. Tanaka
LEBRA, Funabashi, Japan
H. Ogawa, N. Sei
AIST, Tsukuba, Ibaraki, Japan

Funding: This work was supported by JSPS KAKENHI Grant Number JP16K17539 and JP16H03912.
Research and Development of a high performance electron linac for the generation of FEL, Parametric X-ray Radiation (PXR) and THz waves has been continued at the Laboratory for Electron Beam Research and Application (LEBRA) of Nihon University as a joint research with KEK and National Institute of Advanced Industrial Science and Technology. The transport systems of the THz wave were installed in the vacuum chamber on the downstream side of the bending magnet of the PXR and FEL beam-line. The CER and the CSR are generated by the bending magnet each of the beam line. In addition, the CTR using thin metal foil is also generated. The average power of the CTR wave was measured approximately 1 mJ/macro-pulse (pulse width 4.5 µs) near the CTR wave beam source point in the frequency range of 0.1 - 2.5 THz. In addition, the energy of the CER as high as 0.2 mJ/macro-pulse were achieved with the experimental room. Furthermore, CER of the generated the FEL beam line can also be guided from the bending magnet on the downstream side of the undulator without disturbing the FEL oscillations. THz transport beam-lines and the characteristics of the THz waves are discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO024

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)