LINAC2018 - List of Authors (Rimmer, R.A.)

Paper	Title	Page
TUPO076	An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications	513
	E.Z. Barzi, D. Turrioni, C. Ciaccia Fermilab, Batavia, Illinois, USA G.V. Eremeev, R.L. Geng, R.A. Rimmer, A-M. Valente-Feliciano JLab, Newport News, Virginia, USA S. Falletta Politecnico di Torino, Torino, Italy H. Hayano, T. Saeki KEK, Ibaraki, Japan H. Ito Sokendai, Ibaraki, Japan A. Kikuchi NIMS, Tsukuba, Ibaraki, Japan
	Funding: Work supported by U.S. DOE contract No. DE-AC02-07CH11359 A novel electro-chemical technique to produce Nb3Sn films on Nb substrates was developed and optimized at Fermilab. The Nb3Sn phase is obtained in a two-electrode cell, by electrodeposition from aqueous solutions of Sn layers and Cu intermediate layers onto Nb substrates. Subsequent thermal treatments in inert atmosphere are realized at a maximum temperature of 700°C to obtain the Nb3Sn superconducting phase. Several superconduct-ing Nb3Sn films were obtained on Nb substrates by study-ing and optimizing most parameters of the electro-plating process. Samples were characterized at Fermilab, NIMS, KEK and JLAB, including EPMA analyses, DC and in-ductive tests of critical temperature Tc0, and lower critical field Hc1(4.2 K) by SQUID. In parallel to sample devel-opment and fabrication at FNAL, at JLAB and KEK effort was put into etching and electro-polishing techniques adequate to remove the Cu and bronze phases from the samples’ outer surface. This is necessary prior to meas-urements at JLAB of the surface impedance of flat sam-ples in a setup that make use of an RF host cavity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO076
About •	paper received ※ 21 September 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE1A01	PERLE, a Powerful ERL for Experiments at Orsay
	W. Kaabi, I. Chaikovska, A. Stocchi, C. Vallerand LAL, Orsay, France D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom G. Arduini, O.S. Brüning, R. Calaga, L. Dassa, F. Gerigk, B.J. Holzer, E. Jensen, A. Milanese, E. Montesinos, D. Pellegrini, D. Schulte, P.A. Thonet, A. Valloni CERN, Geneva, Switzerland S.A. Bogacz, D. Douglas, F.E. Hannon, A. Hutton, F. Marhauser, R.A. Rimmer, Y. Roblin, C. Tennant JLab, Newport News, Virginia, USA S. Bousson, D. Longuevergne, G. Olivier, G. Olry IPN, Orsay, France B. Hounsell, M. Klein, U.K. Klein, P. Kostka, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom E.B. Levichev, Yu.A. Pupkov BINP SB RAS, Novosibirsk, Russia
	PERLE is a proposed multi-pass Energy Recovery Linac, based on SRF technology, to be built at Orsay, France, in a collaborative effort between local laboratories LAL/IN2P3, IPNO/IN2P3 and international partners such as JLAB, STFC, Liverpool University, BINP and CERN. A part from experimental program, PERLE will serve as testbed to study a broad range of accelerator phenomena and to validate technical choices for the LHeC, which aims at electron proton collisions using the existing LHC machine together with an added electron ERL. In its final configuration, PERLE provides a 500 MeV electron beam using high current (20 mA) acceleration during three passes through 801.6 MHz cavities. This talk outlines the technological choices, the lattice design and describes the potential contributions of the interested partners.
	Slides WE1A01 [3.525 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO004	Pulsed Operation of CEBAF for JLEIC Injection	682
	J. Guo, J.M. Grames, R. Kazimi, F. Lin, T. E. Plawski, R.A. Rimmer, H. Wang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. JLab Electron Ion Collider (JLEIC) is planning to use the recently upgraded 12 GeV CEBAF 1497 MHz SRF CW recirculating linac as a full-energy injector for the electron collider ring. The JLEIC electron injection requires 3-4µs long bunch trains with a 20-400ms spacing in between, resulting in uneven beam loading for the CW CEBAF. With the high beam current in JLEIC collider rings, the low duty factor of injection also requires to a very high pulsed beam current from CEBAF, exacerbating the transient beam loading issue. In this paper, we will present CEBAFs detailed pulsed operation scheme for JLEIC injection, as well as some experimental results at CEBAF.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO004
About •	paper received ※ 20 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications

513

E.Z. Barzi, D. Turrioni, C. Ciaccia
Fermilab, Batavia, Illinois, USA
G.V. Eremeev, R.L. Geng, R.A. Rimmer, A-M. Valente-Feliciano
JLab, Newport News, Virginia, USA
S. Falletta
Politecnico di Torino, Torino, Italy
H. Hayano, T. Saeki
KEK, Ibaraki, Japan
H. Ito
Sokendai, Ibaraki, Japan
A. Kikuchi
NIMS, Tsukuba, Ibaraki, Japan

Funding: Work supported by U.S. DOE contract No. DE-AC02-07CH11359
A novel electro-chemical technique to produce Nb3Sn films on Nb substrates was developed and optimized at Fermilab. The Nb3Sn phase is obtained in a two-electrode cell, by electrodeposition from aqueous solutions of Sn layers and Cu intermediate layers onto Nb substrates. Subsequent thermal treatments in inert atmosphere are realized at a maximum temperature of 700°C to obtain the Nb3Sn superconducting phase. Several superconduct-ing Nb3Sn films were obtained on Nb substrates by study-ing and optimizing most parameters of the electro-plating process. Samples were characterized at Fermilab, NIMS, KEK and JLAB, including EPMA analyses, DC and in-ductive tests of critical temperature Tc0, and lower critical field Hc1(4.2 K) by SQUID. In parallel to sample devel-opment and fabrication at FNAL, at JLAB and KEK effort was put into etching and electro-polishing techniques adequate to remove the Cu and bronze phases from the samples’ outer surface. This is necessary prior to meas-urements at JLAB of the surface impedance of flat sam-ples in a setup that make use of an RF host cavity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO076

About •

paper received ※ 21 September 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE1A01

PERLE, a Powerful ERL for Experiments at Orsay

W. Kaabi, I. Chaikovska, A. Stocchi, C. Vallerand
LAL, Orsay, France
D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
G. Arduini, O.S. Brüning, R. Calaga, L. Dassa, F. Gerigk, B.J. Holzer, E. Jensen, A. Milanese, E. Montesinos, D. Pellegrini, D. Schulte, P.A. Thonet, A. Valloni
CERN, Geneva, Switzerland
S.A. Bogacz, D. Douglas, F.E. Hannon, A. Hutton, F. Marhauser, R.A. Rimmer, Y. Roblin, C. Tennant
JLab, Newport News, Virginia, USA
S. Bousson, D. Longuevergne, G. Olivier, G. Olry
IPN, Orsay, France
B. Hounsell, M. Klein, U.K. Klein, P. Kostka, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
E.B. Levichev, Yu.A. Pupkov
BINP SB RAS, Novosibirsk, Russia

PERLE is a proposed multi-pass Energy Recovery Linac, based on SRF technology, to be built at Orsay, France, in a collaborative effort between local laboratories LAL/IN2P3, IPNO/IN2P3 and international partners such as JLAB, STFC, Liverpool University, BINP and CERN. A part from experimental program, PERLE will serve as testbed to study a broad range of accelerator phenomena and to validate technical choices for the LHeC, which aims at electron proton collisions using the existing LHC machine together with an added electron ERL. In its final configuration, PERLE provides a 500 MeV electron beam using high current (20 mA) acceleration during three passes through 801.6 MHz cavities. This talk outlines the technological choices, the lattice design and describes the potential contributions of the interested partners.

Slides WE1A01 [3.525 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO004

Pulsed Operation of CEBAF for JLEIC Injection

682

J. Guo, J.M. Grames, R. Kazimi, F. Lin, T. E. Plawski, R.A. Rimmer, H. Wang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
JLab Electron Ion Collider (JLEIC) is planning to use the recently upgraded 12 GeV CEBAF 1497 MHz SRF CW recirculating linac as a full-energy injector for the electron collider ring. The JLEIC electron injection requires 3-4µs long bunch trains with a 20-400ms spacing in between, resulting in uneven beam loading for the CW CEBAF. With the high beam current in JLEIC collider rings, the low duty factor of injection also requires to a very high pulsed beam current from CEBAF, exacerbating the transient beam loading issue. In this paper, we will present CEBAFs detailed pulsed operation scheme for JLEIC injection, as well as some experimental results at CEBAF.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO004

About •

paper received ※ 20 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)