LINAC2018 - List of Authors (Porter, R.D.)

Paper	Title	Page
TUPO055	Next Generation Nb3Sn SRF Cavities for Linear Accelerators	462
	R.D. Porter, D.L. Hall, M. Liepe, J.T. Maniscalco Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA T. Arias, P. Cueva, D.A. Muller, N. Sitaraman Cornell University, Ithaca, New York, USA
	Niobium-3 Tin (Nb3Sn) is a very promising alternative material for SRF accelerator cavities. The material can achieve higher quality factors, higher temperature operation and potentially higher accelerating gradients (~ 96 MV/m) compared to conventional niobium. This material is formed by vaporizing Sn in a high temperature vacuum furnace and letting the Sn absorb into a Nb substrate to form a 2-3 um Nb3Sn layer. Current Nb3Sn cavities produced at Cornell achieve Q ~ 10¹⁰ at 4.2 K and 17 MV/m. Here we present a summary of the current performance of Nb₃Sn cavities at Cornell and recent progress in improving the accelerating gradient.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO055
About •	paper received ※ 20 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO059	Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell	473
	M. Ge, F. Furuta, T. Gruber, J.J. Kaufman, M. Liepe, R.D. Porter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA T.D. Hall, R. Radhakrishnan, S.T. Snyder, E.J. Taylor Faraday Technology, Inc., Clayton, Ohio, USA
	Acid free electropolishing would be safer to use and friendlier to the environment. A collaboration, sup-ported by the DOE SBIR Phase-II program, between Faraday Technology Inc. and Cornell University focused on salt-based bipolar electropolishing (BEP). In this paper, we present the latest salt-based BEP results. The superconducting performance of a single-cell 1.3GHz cavity has been carefully analyzed, showing that salt-based BEP is promising, but still has large room for improvement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO059
About •	paper received ※ 19 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Next Generation Nb3Sn SRF Cavities for Linear Accelerators

462

R.D. Porter, D.L. Hall, M. Liepe, J.T. Maniscalco
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
T. Arias, P. Cueva, D.A. Muller, N. Sitaraman
Cornell University, Ithaca, New York, USA

Niobium-3 Tin (Nb3Sn) is a very promising alternative material for SRF accelerator cavities. The material can achieve higher quality factors, higher temperature operation and potentially higher accelerating gradients (~ 96 MV/m) compared to conventional niobium. This material is formed by vaporizing Sn in a high temperature vacuum furnace and letting the Sn absorb into a Nb substrate to form a 2-3 um Nb3Sn layer. Current Nb3Sn cavities produced at Cornell achieve Q ~ 10¹⁰ at 4.2 K and 17 MV/m. Here we present a summary of the current performance of Nb₃Sn cavities at Cornell and recent progress in improving the accelerating gradient.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO055

About •

paper received ※ 20 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO059

Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell

473

M. Ge, F. Furuta, T. Gruber, J.J. Kaufman, M. Liepe, R.D. Porter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
T.D. Hall, R. Radhakrishnan, S.T. Snyder, E.J. Taylor
Faraday Technology, Inc., Clayton, Ohio, USA

Acid free electropolishing would be safer to use and friendlier to the environment. A collaboration, sup-ported by the DOE SBIR Phase-II program, between Faraday Technology Inc. and Cornell University focused on salt-based bipolar electropolishing (BEP). In this paper, we present the latest salt-based BEP results. The superconducting performance of a single-cell 1.3GHz cavity has been carefully analyzed, showing that salt-based BEP is promising, but still has large room for improvement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO059

About •

paper received ※ 19 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)