LINAC2018 - List of Authors (Otake, Y.)

Paper	Title	Page
THPO124	Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode	949
	T. Asaka, H. Tanaka RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan Y. Otake JASRI, Hyogo, Japan T. Taniuchi JASRI/SPring-8, Hyogo-ken, Japan
	In recent state-of -arts accelerators like an X-ray free electron laser, the electron beam performance of a linear accelerator demands a low emittance of ~ 2mm mrad. To obtain the low-emittance, such a 500kV thermionic-gun at SACLA and a photocathode rf gun generating 0.5~1MeV electron beams had been developed. Although the photocathode rf gun is compact, it is necessary to prepare a highly stabilized, large and complicated laser system. The 500-kV thermionic-gun of SACLA injector has also to prepare a technically difficult and large high voltage system. Hence, we propose a low-emittance gun system with a low-voltage and grid-loaded 50kV thermionic gun and a 238MHz rf cavity to overcome the complicated difficulty, as extension of the established technology. This system quickly accelerates the electron up to 500keV to preserve the low emittance and to cancel a grid focusing effect by the space charge force of the beam. By using a particle tracking code, we obtained the optimum voltage parameters of the grid and the 238MHz rf for obtaining the above-mentioned low emittance. In this paper, we present a numerical feasibility study to realize the low-emittance gun system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO124
About •	paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO091	90 kW Solid-state RF Amplifier with a TE011-mode Cavity Power-combiner at 476 MHz	889
THOP07	use link to see paper's listing under its alternate paper code
	Y. Otake, T. Asaka, T. Inagaki RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan S. Aizawa, K. Nagatsuka, T. Okuyama, K. Sato, H. Yamada Nihon Koshuha Co. Ltd, Yokohama, Japan
	Solid-state RF amplifiers, which have long lifetimes and small failures, are the recent trend of reliable and stable high-power rf sources for particle accelerators. Hence, we designed a 90kW solid-state amplifier with an extreme low-loss TE011 mode cavity (Q0=100, 000) power-combiner operated at 476 MHz and a 6 us pulse width. Developing this amplifier is for replacement of an IOT rf amplifier, at the X-ray free-electron laser, SACLA. In SACLA, highly RF phase and amplitude stabilities of less than 0.02 deg. and 10^-4 in rms are necessary to stable lasing within a 10 % intensity fluctuation. The amplifier comprises a drive amplifier, a reentrant cavity rf power divider, 100 final amplifiers with a 1 kW output each and a TE011 mode cavity combiner. Water-cooling within 10 mK and a DC power supply with a noise of less than -100 dBV at 10 Hz for the amplifier is necessary to realize the previously mentioned stabilities. Based on the test results of the amplifier, the above-mentioned specifications with the extreme low-loss are promising. The amplifier also allows us to operate in pulsed and CW rfs for linacs and ring accelerators. We report the performance of the 90kW amplifier.
	Slides THPO091 [1.750 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO091
About •	paper received ※ 06 September 2018 paper accepted ※ 09 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FR1A06	Pulse-by-Pulse Beam Parameter Switching of High-Quality Beams for Multi-Beamline Operation at SACLA	988
	H. Maesaka, T. Fukui, T. Hara, Y. Otake RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan T. Hasegawa, O. Morimoto, Y. Tajiri, S. Tanaka, M. Yoshioka SES, Hyogo-pref., Japan N. Hosoda, S. Matsubara, T. Ohshima JASRI/SPring-8, Hyogo-ken, Japan C. Kondo, M. Yamaga JASRI, Hyogo, Japan
	The main linac of the X-ray free electron laser (XFEL), SACLA, provides electron beams to two XFEL beamlines and a beam transport line to the SPring-8 storage ring. In order to utilize these beamlines at the same time, a kicker magnet was installed into the switch yard and electron beams with a 60 Hz repetition rate can be distributed to these beamlines pulse-by-pulse. Since a beam energy and an optimum bunch length are usually different for each beamline, the operation condition of each acceleration unit, such as the rf phase, the trigger permission, etc., has to be changed pulse-by-pulse. Even in that case, the electron beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length, 10 kA peak current, etc., must not be deteriorated. At first, we developed a parameter control software that was able to manage two XFEL beamlines with an equal repetition rate. Different energy beams with sufficient quality for lasing were successfully distributed to the two XFEL beamlines and the XFEL performances of both beamlines were optimized simultaneously. The development status of a new parameter switching system with an arbitrary sequence of the destinations will also be reported.
	Slides FR1A06 [6.179 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-FR1A06
About •	paper received ※ 16 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode

949

T. Asaka, H. Tanaka
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
Y. Otake
JASRI, Hyogo, Japan
T. Taniuchi
JASRI/SPring-8, Hyogo-ken, Japan

In recent state-of -arts accelerators like an X-ray free electron laser, the electron beam performance of a linear accelerator demands a low emittance of ~ 2mm mrad. To obtain the low-emittance, such a 500kV thermionic-gun at SACLA and a photocathode rf gun generating 0.5~1MeV electron beams had been developed. Although the photocathode rf gun is compact, it is necessary to prepare a highly stabilized, large and complicated laser system. The 500-kV thermionic-gun of SACLA injector has also to prepare a technically difficult and large high voltage system. Hence, we propose a low-emittance gun system with a low-voltage and grid-loaded 50kV thermionic gun and a 238MHz rf cavity to overcome the complicated difficulty, as extension of the established technology. This system quickly accelerates the electron up to 500keV to preserve the low emittance and to cancel a grid focusing effect by the space charge force of the beam. By using a particle tracking code, we obtained the optimum voltage parameters of the grid and the 238MHz rf for obtaining the above-mentioned low emittance. In this paper, we present a numerical feasibility study to realize the low-emittance gun system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO124

About •

paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO091

90 kW Solid-state RF Amplifier with a TE011-mode Cavity Power-combiner at 476 MHz

889

THOP07

use link to see paper's listing under its alternate paper code

Y. Otake, T. Asaka, T. Inagaki
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
S. Aizawa, K. Nagatsuka, T. Okuyama, K. Sato, H. Yamada
Nihon Koshuha Co. Ltd, Yokohama, Japan

Solid-state RF amplifiers, which have long lifetimes and small failures, are the recent trend of reliable and stable high-power rf sources for particle accelerators. Hence, we designed a 90kW solid-state amplifier with an extreme low-loss TE011 mode cavity (Q0=100, 000) power-combiner operated at 476 MHz and a 6 us pulse width. Developing this amplifier is for replacement of an IOT rf amplifier, at the X-ray free-electron laser, SACLA. In SACLA, highly RF phase and amplitude stabilities of less than 0.02 deg. and 10^-4 in rms are necessary to stable lasing within a 10 % intensity fluctuation. The amplifier comprises a drive amplifier, a reentrant cavity rf power divider, 100 final amplifiers with a 1 kW output each and a TE011 mode cavity combiner. Water-cooling within 10 mK and a DC power supply with a noise of less than -100 dBV at 10 Hz for the amplifier is necessary to realize the previously mentioned stabilities. Based on the test results of the amplifier, the above-mentioned specifications with the extreme low-loss are promising. The amplifier also allows us to operate in pulsed and CW rfs for linacs and ring accelerators. We report the performance of the 90kW amplifier.

Slides THPO091 [1.750 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO091

About •

paper received ※ 06 September 2018 paper accepted ※ 09 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FR1A06

Pulse-by-Pulse Beam Parameter Switching of High-Quality Beams for Multi-Beamline Operation at SACLA

988

H. Maesaka, T. Fukui, T. Hara, Y. Otake
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
T. Hasegawa, O. Morimoto, Y. Tajiri, S. Tanaka, M. Yoshioka
SES, Hyogo-pref., Japan
N. Hosoda, S. Matsubara, T. Ohshima
JASRI/SPring-8, Hyogo-ken, Japan
C. Kondo, M. Yamaga
JASRI, Hyogo, Japan

The main linac of the X-ray free electron laser (XFEL), SACLA, provides electron beams to two XFEL beamlines and a beam transport line to the SPring-8 storage ring. In order to utilize these beamlines at the same time, a kicker magnet was installed into the switch yard and electron beams with a 60 Hz repetition rate can be distributed to these beamlines pulse-by-pulse. Since a beam energy and an optimum bunch length are usually different for each beamline, the operation condition of each acceleration unit, such as the rf phase, the trigger permission, etc., has to be changed pulse-by-pulse. Even in that case, the electron beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length, 10 kA peak current, etc., must not be deteriorated. At first, we developed a parameter control software that was able to manage two XFEL beamlines with an equal repetition rate. Different energy beams with sufficient quality for lasing were successfully distributed to the two XFEL beamlines and the XFEL performances of both beamlines were optimized simultaneously. The development status of a new parameter switching system with an arbitrary sequence of the destinations will also be reported.

Slides FR1A06 [6.179 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-FR1A06

About •

paper received ※ 16 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)