LINAC2018 - List of Authors (Miyahara, F.)

Paper	Title	Page
WE1A06	Pulse-to-pulse Beam Modulation for 4 Storage Rings with 64 Pulsed Magnets	609
	Y. Enomoto, K. Furukawa, T. Kamitani, F. Miyahara, T. Natsui, M. Satoh, K. Yokoyama, M. Yoshida KEK, Ibaraki, Japan H.S. Saotome Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan S. Ushimoto Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
	The KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It is planned to inject electron and positron beams with energies from 2.5 GeV to 7 GeV pulse-by-pulse at 50 Hz into the dual ring SuperKEKB collider and two light source storage rings. As the beam quality requirement from SuperKEKB is demanding, the beam orbit and optics conditions have to be maintained precisely. To that end 64 newly designed pulsed magnets were installed. Quadrupole magnets with the inductance of 1 mH are driven by power supplies with pulses up to 330 A and 0.5 ms, which recover the energy stored in coils up to 65%. Orbit corrector magnets with the inductance of 3 mH are driven with bipolar pulsed power supplies up to 10 A. Those power supplies are controlled under the event-based synchronized controls and monitored pulse-by-pulse, and are confirmed to have the stability over weeks within 0.1%. The details of the design and the operational performance will be reported.
	Slides WE1A06 [6.694 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-WE1A06
About •	paper received ※ 11 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Pulse-to-pulse Beam Modulation for 4 Storage Rings with 64 Pulsed Magnets

609

Y. Enomoto, K. Furukawa, T. Kamitani, F. Miyahara, T. Natsui, M. Satoh, K. Yokoyama, M. Yoshida
KEK, Ibaraki, Japan
H.S. Saotome
Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan
S. Ushimoto
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan

The KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It is planned to inject electron and positron beams with energies from 2.5 GeV to 7 GeV pulse-by-pulse at 50 Hz into the dual ring SuperKEKB collider and two light source storage rings. As the beam quality requirement from SuperKEKB is demanding, the beam orbit and optics conditions have to be maintained precisely. To that end 64 newly designed pulsed magnets were installed. Quadrupole magnets with the inductance of 1 mH are driven by power supplies with pulses up to 330 A and 0.5 ms, which recover the energy stored in coils up to 65%. Orbit corrector magnets with the inductance of 3 mH are driven with bipolar pulsed power supplies up to 10 A. Those power supplies are controlled under the event-based synchronized controls and monitored pulse-by-pulse, and are confirmed to have the stability over weeks within 0.1%. The details of the design and the operational performance will be reported.

Slides WE1A06 [6.694 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-WE1A06

About •

paper received ※ 11 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)