Paper |
Title |
Page |
TUPO039 |
Tests of the Balloon Single Spoke Resonator |
417 |
TUOP07 |
|
|
- Z.Y. Yao, J.J. Keir, D. Kishi, D. Lang, R.E. Laxdal, H. Liu, Y. Ma, B. Matheson, B.S. Waraich, Q. Zheng, V. Zvyagintsev
TRIUMF, Vancouver, Canada
|
|
|
A balloon variant of the single spoke resonator (SSR) has been designed, fabricated and tested. The cavity is the SSR1 prototype for the Rare Isotope Science Project (RISP) in Korea. It is specifically designed to reduce the likelihood of multipacting barriers near the operating point. A systematic multipacting study leads to a novel geometry, a spherical cavity with re-entrant irises and a spoke. Other than eliminating multipacting around operational gradient, the balloon shape also provides competitive RF parameters and robust mechanical structure. Cryostat cold tests demonstrated cavity performance on each design aspect. The cold tests will be reported in this paper.
|
|
|
Slides TUPO039 [25.279 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO039
|
|
About • |
paper received ※ 17 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPO040 |
Tests of Multi-frequency Coaxial Resonators |
420 |
|
- Z.Y. Yao, J.J. Keir, P. Kolb, A. Kong, R.E. Laxdal, B. Matheson, E. Thoeng, B.S. Waraich, Q. Zheng, V. Zvyagintsev
TRIUMF, Vancouver, Canada
|
|
|
A significant issue in low beta resonators is medium field Q-slope (MFQS) at 4K. To study the MFQS and the field dependence of surface resistance in low beta resonators, a quarter-wave resonator (QWR) and a half-wave resonator (HWR) were designed to be tested at integer harmonic frequencies of 200MHz, and up to 1.2GHz. A series of chemistry and heat treatments are proposed to these cavities. A systemic study on the surface resistance of the coaxial resonators associating with post-processing, RF field, and frequency is in progress. The cavities were designed and fabricated. The cold test results will be discussed in this paper.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO040
|
|
About • |
paper received ※ 17 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|