LINAC2018 - List of Authors (Maesaka, H.)

Paper	Title	Page
FR1A06	Pulse-by-Pulse Beam Parameter Switching of High-Quality Beams for Multi-Beamline Operation at SACLA	988
	H. Maesaka, T. Fukui, T. Hara, Y. Otake RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan T. Hasegawa, O. Morimoto, Y. Tajiri, S. Tanaka, M. Yoshioka SES, Hyogo-pref., Japan N. Hosoda, S. Matsubara, T. Ohshima JASRI/SPring-8, Hyogo-ken, Japan C. Kondo, M. Yamaga JASRI, Hyogo, Japan
	The main linac of the X-ray free electron laser (XFEL), SACLA, provides electron beams to two XFEL beamlines and a beam transport line to the SPring-8 storage ring. In order to utilize these beamlines at the same time, a kicker magnet was installed into the switch yard and electron beams with a 60 Hz repetition rate can be distributed to these beamlines pulse-by-pulse. Since a beam energy and an optimum bunch length are usually different for each beamline, the operation condition of each acceleration unit, such as the rf phase, the trigger permission, etc., has to be changed pulse-by-pulse. Even in that case, the electron beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length, 10 kA peak current, etc., must not be deteriorated. At first, we developed a parameter control software that was able to manage two XFEL beamlines with an equal repetition rate. Different energy beams with sufficient quality for lasing were successfully distributed to the two XFEL beamlines and the XFEL performances of both beamlines were optimized simultaneously. The development status of a new parameter switching system with an arbitrary sequence of the destinations will also be reported.
	Slides FR1A06 [6.179 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-FR1A06
About •	paper received ※ 16 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Pulse-by-Pulse Beam Parameter Switching of High-Quality Beams for Multi-Beamline Operation at SACLA

988

H. Maesaka, T. Fukui, T. Hara, Y. Otake
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
T. Hasegawa, O. Morimoto, Y. Tajiri, S. Tanaka, M. Yoshioka
SES, Hyogo-pref., Japan
N. Hosoda, S. Matsubara, T. Ohshima
JASRI/SPring-8, Hyogo-ken, Japan
C. Kondo, M. Yamaga
JASRI, Hyogo, Japan

The main linac of the X-ray free electron laser (XFEL), SACLA, provides electron beams to two XFEL beamlines and a beam transport line to the SPring-8 storage ring. In order to utilize these beamlines at the same time, a kicker magnet was installed into the switch yard and electron beams with a 60 Hz repetition rate can be distributed to these beamlines pulse-by-pulse. Since a beam energy and an optimum bunch length are usually different for each beamline, the operation condition of each acceleration unit, such as the rf phase, the trigger permission, etc., has to be changed pulse-by-pulse. Even in that case, the electron beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length, 10 kA peak current, etc., must not be deteriorated. At first, we developed a parameter control software that was able to manage two XFEL beamlines with an equal repetition rate. Different energy beams with sufficient quality for lasing were successfully distributed to the two XFEL beamlines and the XFEL performances of both beamlines were optimized simultaneously. The development status of a new parameter switching system with an arbitrary sequence of the destinations will also be reported.

Slides FR1A06 [6.179 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-FR1A06

About •

paper received ※ 16 September 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)