Author: Kuriki, M.
Paper Title Page
THPO005 High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders 685
 
  • M. Kuriki
    HU/AdSM, Higashi-Hiroshima, Japan
  • H. Hayano, X.J. Jin, T. Konomi, Y. Seimiya, N. Yamamoto
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • P. Piot
    Northern Illinois University, DeKalb, Illinois, USA
  • J.G. Power
    ANL, Argonne, Illinois, USA
  • K. Sakaue
    Waseda University, Waseda Institute for Advanced Study, Tokyo, Japan
  • M. Washio
    RISE, Tokyo, Japan
  • H.W. Zhao
    IMP/CAS, Lanzhou, People’s Republic of China
  
  Funding: This work is partly supported by Grant-in-Aid for Scientific Research (B) and US-Japan Science and Technology Cooperation Program in High Energy Physics.
Linear colliders is the only way to realize e+ e− collision at higher energy beyond the limit of ring colliders by the huge synchrotron radiation energy loss. In the linear collider, the beam current should be much smaller comparing to the ring collider to save the required electricity. A way to realize an enough luminosity with the small beam current and less energy spread by Beamstrahlung, is collision in flat beam. This high aspect ratio beam can be made by phase-space rotation technique instead of the conventional way with DR (Damping Ring). We present a simulation of this technique and pilot experiments at KEK-STF and ANL WFA. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO005  
About • paper received ※ 12 September 2018       paper accepted ※ 21 September 2018       issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPO127 The Effect of Energy Fluctuation on the Multi-bunch Acceleration in E-driven ILC Positron Source 958
 
  • M. Kuriki, H. Nagoshi
    HU/AdSM, Higashi-Hiroshima, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • K. Negishi
    Iwate University, Morioka, Iwate, Japan
  • T. Okugi, T. Omori, M. Satoh, Y. Seimiya, J. Urakawa, K. Yokoya
    KEK, Ibaraki, Japan
  • Y. Sumitomo
    LEBRA, Funabashi, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  
  E-Driven method is a technical backup for positron source for ILC. In the positron source, the positron is generated and accelerated in a multi-bunch format with gaps in a macro-pulse. We employ AM (Amplitude Modulation) to suppress the transient beam-loading, but a small fluctuation is still expected, depending on the compensation accuracy. In this article, the positron yield which is ratio of numbers of positrons over electrons, is evaluated as a function of the compensation accuracy. With this result and the detail investigation of the beam loading compensation accuracy by AM, the positron yield of E-Driven Positron source for ILC is evaluated.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO127  
About • paper received ※ 12 September 2018       paper accepted ※ 19 September 2018       issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)