LINAC2018 - List of Authors (Kolb, P.)

Paper	Title	Page
THPO006	Status of 650 MHz SRF Cavity for eRHIC SRF Linac	688
	W. Xu, I. Ben-Zvi, Y. Gao, D. Holmes, P. Kolb, G.T. McIntyre, R. Porqueddu, K.S. Smith, F.J. Willeke, Q. Wu, A. Zaltsman BNL, Upton, Long Island, New York, USA
	Funding: This work is supported by LDRD program of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE. A 5-cell 650 MHz SRF cavity was designed for eRHIC SRF linac. One Cu cavity was fabricated for HOM damping study, and one Nb cavity was fabricated for SRF studies. Through various post-processing recipes and vertical tests, the SRF study includes high Q-value study for ERL SRF linac and high gradient study for recirculating linac. This paper reports the HOM damping measurement on the Cu cavity and preliminary vertical test results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO006
About •	paper received ※ 22 August 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO040	Tests of Multi-frequency Coaxial Resonators	420
	Z.Y. Yao, J.J. Keir, P. Kolb, A. Kong, R.E. Laxdal, B. Matheson, E. Thoeng, B.S. Waraich, Q. Zheng, V. Zvyagintsev TRIUMF, Vancouver, Canada
	A significant issue in low beta resonators is medium field Q-slope (MFQS) at 4K. To study the MFQS and the field dependence of surface resistance in low beta resonators, a quarter-wave resonator (QWR) and a half-wave resonator (HWR) were designed to be tested at integer harmonic frequencies of 200MHz, and up to 1.2GHz. A series of chemistry and heat treatments are proposed to these cavities. A systemic study on the surface resistance of the coaxial resonators associating with post-processing, RF field, and frequency is in progress. The cavities were designed and fabricated. The cold test results will be discussed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO040
About •	paper received ※ 17 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of 650 MHz SRF Cavity for eRHIC SRF Linac

688

W. Xu, I. Ben-Zvi, Y. Gao, D. Holmes, P. Kolb, G.T. McIntyre, R. Porqueddu, K.S. Smith, F.J. Willeke, Q. Wu, A. Zaltsman
BNL, Upton, Long Island, New York, USA

Funding: This work is supported by LDRD program of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE.
A 5-cell 650 MHz SRF cavity was designed for eRHIC SRF linac. One Cu cavity was fabricated for HOM damping study, and one Nb cavity was fabricated for SRF studies. Through various post-processing recipes and vertical tests, the SRF study includes high Q-value study for ERL SRF linac and high gradient study for recirculating linac. This paper reports the HOM damping measurement on the Cu cavity and preliminary vertical test results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO006

About •

paper received ※ 22 August 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO040

Tests of Multi-frequency Coaxial Resonators

420

Z.Y. Yao, J.J. Keir, P. Kolb, A. Kong, R.E. Laxdal, B. Matheson, E. Thoeng, B.S. Waraich, Q. Zheng, V. Zvyagintsev
TRIUMF, Vancouver, Canada

A significant issue in low beta resonators is medium field Q-slope (MFQS) at 4K. To study the MFQS and the field dependence of surface resistance in low beta resonators, a quarter-wave resonator (QWR) and a half-wave resonator (HWR) were designed to be tested at integer harmonic frequencies of 200MHz, and up to 1.2GHz. A series of chemistry and heat treatments are proposed to these cavities. A systemic study on the surface resistance of the coaxial resonators associating with post-processing, RF field, and frequency is in progress. The cavities were designed and fabricated. The cold test results will be discussed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO040

About •

paper received ※ 17 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)