LINAC2018 - List of Authors (Inagaki, T.)

Paper	Title	Page
THPO091	90 kW Solid-state RF Amplifier with a TE011-mode Cavity Power-combiner at 476 MHz	889
THOP07	use link to see paper's listing under its alternate paper code
	Y. Otake, T. Asaka, T. Inagaki RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan S. Aizawa, K. Nagatsuka, T. Okuyama, K. Sato, H. Yamada Nihon Koshuha Co. Ltd, Yokohama, Japan
	Solid-state RF amplifiers, which have long lifetimes and small failures, are the recent trend of reliable and stable high-power rf sources for particle accelerators. Hence, we designed a 90kW solid-state amplifier with an extreme low-loss TE011 mode cavity (Q0=100, 000) power-combiner operated at 476 MHz and a 6 us pulse width. Developing this amplifier is for replacement of an IOT rf amplifier, at the X-ray free-electron laser, SACLA. In SACLA, highly RF phase and amplitude stabilities of less than 0.02 deg. and 10^-4 in rms are necessary to stable lasing within a 10 % intensity fluctuation. The amplifier comprises a drive amplifier, a reentrant cavity rf power divider, 100 final amplifiers with a 1 kW output each and a TE011 mode cavity combiner. Water-cooling within 10 mK and a DC power supply with a noise of less than -100 dBV at 10 Hz for the amplifier is necessary to realize the previously mentioned stabilities. Based on the test results of the amplifier, the above-mentioned specifications with the extreme low-loss are promising. The amplifier also allows us to operate in pulsed and CW rfs for linacs and ring accelerators. We report the performance of the 90kW amplifier.
	Slides THPO091 [1.750 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO091
About •	paper received ※ 06 September 2018 paper accepted ※ 09 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

THPO091

90 kW Solid-state RF Amplifier with a TE011-mode Cavity Power-combiner at 476 MHz

889

THOP07

use link to see paper's listing under its alternate paper code

Y. Otake, T. Asaka, T. Inagaki
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
S. Aizawa, K. Nagatsuka, T. Okuyama, K. Sato, H. Yamada
Nihon Koshuha Co. Ltd, Yokohama, Japan

Solid-state RF amplifiers, which have long lifetimes and small failures, are the recent trend of reliable and stable high-power rf sources for particle accelerators. Hence, we designed a 90kW solid-state amplifier with an extreme low-loss TE011 mode cavity (Q0=100, 000) power-combiner operated at 476 MHz and a 6 us pulse width. Developing this amplifier is for replacement of an IOT rf amplifier, at the X-ray free-electron laser, SACLA. In SACLA, highly RF phase and amplitude stabilities of less than 0.02 deg. and 10^-4 in rms are necessary to stable lasing within a 10 % intensity fluctuation. The amplifier comprises a drive amplifier, a reentrant cavity rf power divider, 100 final amplifiers with a 1 kW output each and a TE011 mode cavity combiner. Water-cooling within 10 mK and a DC power supply with a noise of less than -100 dBV at 10 Hz for the amplifier is necessary to realize the previously mentioned stabilities. Based on the test results of the amplifier, the above-mentioned specifications with the extreme low-loss are promising. The amplifier also allows us to operate in pulsed and CW rfs for linacs and ring accelerators. We report the performance of the 90kW amplifier.

Slides THPO091 [1.750 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO091

About •

paper received ※ 06 September 2018 paper accepted ※ 09 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)