LINAC2018 - List of Authors (Ge, M.)

Paper	Title	Page
TUPO057	Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities	466
	M. Ge, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Low-temperature infusion has become a hot-topic in SRF researches recently. Past results show that low-temperature infusion can produce high quality factor at medium accelerating fields. Also, 75°C baking recently has been shown to improve accelerating gradients of SRF cavities. Hence these treatments are very promising for reducing cost of the ILC. In this work, we present latest results of low temperature infusion and baking, showing that these treatments can improve SRF cavities performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO057
About •	paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO058	Cool Down Studies for the LCLS-II Project	470
	M. Ge, M. Liepe Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA D. Gonnella SLAC, Menlo Park, California, USA J. Sears Cornell University, Ithaca, New York, USA
	The quality factor of the nitrogen-doped SRF cavities for the LCLS-II project are strongly impacted by cool down speed. A sufficiently fast cool down speed can produce large thermal gradient across a cavity and sufficiently expel magnetic flux when the cavity wall passes from the normal-conducting to the superconducting state. However, instrumentation in LCLS-II production cryomodules has been kept at a minimum, and additional information during the cool down of the modules is therefore desirable. In this work, we study if and how RF data can be used during cavity cool-down to determine the transition speeds of the individual cavities in the LCLS-II linac.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO058
About •	paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO059	Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell	473
	M. Ge, F. Furuta, T. Gruber, J.J. Kaufman, M. Liepe, R.D. Porter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA T.D. Hall, R. Radhakrishnan, S.T. Snyder, E.J. Taylor Faraday Technology, Inc., Clayton, Ohio, USA
	Acid free electropolishing would be safer to use and friendlier to the environment. A collaboration, sup-ported by the DOE SBIR Phase-II program, between Faraday Technology Inc. and Cornell University focused on salt-based bipolar electropolishing (BEP). In this paper, we present the latest salt-based BEP results. The superconducting performance of a single-cell 1.3GHz cavity has been carefully analyzed, showing that salt-based BEP is promising, but still has large room for improvement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO059
About •	paper received ※ 19 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE1A02	CBETA, a 4-turn ERL Based on SRF Linacs and Permanent Magnet Beam Transport
	G.H. Hoffstaetter, N. Banerjee, J. Barley, A.C. Bartnik, I.V. Bazarov, D.C. Burke, J.A. Crittenden, L. Cultrera, J. Dobbins, F. Furuta, R.E. Gallagher, M. Ge, C.M. Gulliford, B.K. Heltsley, R.P.K. Kaplan, V.O. Kostroun, Y. Li, M. Liepe, W. Lou, J.R. Patterson, P. Quigley, D.M. Sabol, D. Sagan, J. Sears, C.H. Shore, E.N. Smith, K.W. Smolenski, V. Veshcherevich, D. Widger Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA J.S. Berg, S.J. Brooks, C. Liu, G.J. Mahler, F. Méot, R.J. Michnoff, M.G. Minty, S. Peggs, V. Ptitsyn, T. Roser, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, F.J. Willeke, H. Witte BNL, Upton, Long Island, New York, USA D. Jusic Cornell University, Ithaca, New York, USA
	A collaboration between Cornell University and Brookhaven National Laboratory has designed a novel accelerator and is constructing it at Cornell: CBETA, the Cornell-BNL ERL Test Accelerator. The ERL technology that has been prototyped at Cornell for many years is being used, including a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule optimized for ERLs, a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. BNL has designed a multi-turn ERL and a recirculating linac for eRHIC; in both designs the beam is transported many times around the 4 km long RHIC tunnel. The number of transport lines is minimized by using two arcs with Fixed Field Alternating Gradient design. This technique will be tested in CBETA, which has a single return for the 4-beam energies with strongly-focusing permanent magnets of Halbach type. The high-brightness beam with 150 MeV and up to 40 mA will have applications for Electron Ion Colliders (EICs), e.g. for their electron cooling, and for applications in industry, in nuclear physics, and in X-ray science.
	Slides WE1A02 [6.367 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities

466

M. Ge, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Low-temperature infusion has become a hot-topic in SRF researches recently. Past results show that low-temperature infusion can produce high quality factor at medium accelerating fields. Also, 75°C baking recently has been shown to improve accelerating gradients of SRF cavities. Hence these treatments are very promising for reducing cost of the ILC. In this work, we present latest results of low temperature infusion and baking, showing that these treatments can improve SRF cavities performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO057

About •

paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO058

Cool Down Studies for the LCLS-II Project

470

M. Ge, M. Liepe
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
D. Gonnella
SLAC, Menlo Park, California, USA
J. Sears
Cornell University, Ithaca, New York, USA

The quality factor of the nitrogen-doped SRF cavities for the LCLS-II project are strongly impacted by cool down speed. A sufficiently fast cool down speed can produce large thermal gradient across a cavity and sufficiently expel magnetic flux when the cavity wall passes from the normal-conducting to the superconducting state. However, instrumentation in LCLS-II production cryomodules has been kept at a minimum, and additional information during the cool down of the modules is therefore desirable. In this work, we study if and how RF data can be used during cavity cool-down to determine the transition speeds of the individual cavities in the LCLS-II linac.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO058

About •

paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO059

Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell

473

M. Ge, F. Furuta, T. Gruber, J.J. Kaufman, M. Liepe, R.D. Porter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
T.D. Hall, R. Radhakrishnan, S.T. Snyder, E.J. Taylor
Faraday Technology, Inc., Clayton, Ohio, USA

Acid free electropolishing would be safer to use and friendlier to the environment. A collaboration, sup-ported by the DOE SBIR Phase-II program, between Faraday Technology Inc. and Cornell University focused on salt-based bipolar electropolishing (BEP). In this paper, we present the latest salt-based BEP results. The superconducting performance of a single-cell 1.3GHz cavity has been carefully analyzed, showing that salt-based BEP is promising, but still has large room for improvement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO059

About •

paper received ※ 19 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WE1A02

CBETA, a 4-turn ERL Based on SRF Linacs and Permanent Magnet Beam Transport

G.H. Hoffstaetter, N. Banerjee, J. Barley, A.C. Bartnik, I.V. Bazarov, D.C. Burke, J.A. Crittenden, L. Cultrera, J. Dobbins, F. Furuta, R.E. Gallagher, M. Ge, C.M. Gulliford, B.K. Heltsley, R.P.K. Kaplan, V.O. Kostroun, Y. Li, M. Liepe, W. Lou, J.R. Patterson, P. Quigley, D.M. Sabol, D. Sagan, J. Sears, C.H. Shore, E.N. Smith, K.W. Smolenski, V. Veshcherevich, D. Widger
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
J.S. Berg, S.J. Brooks, C. Liu, G.J. Mahler, F. Méot, R.J. Michnoff, M.G. Minty, S. Peggs, V. Ptitsyn, T. Roser, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, F.J. Willeke, H. Witte
BNL, Upton, Long Island, New York, USA
D. Jusic
Cornell University, Ithaca, New York, USA

A collaboration between Cornell University and Brookhaven National Laboratory has designed a novel accelerator and is constructing it at Cornell: CBETA, the Cornell-BNL ERL Test Accelerator. The ERL technology that has been prototyped at Cornell for many years is being used, including a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule optimized for ERLs, a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. BNL has designed a multi-turn ERL and a recirculating linac for eRHIC; in both designs the beam is transported many times around the 4 km long RHIC tunnel. The number of transport lines is minimized by using two arcs with Fixed Field Alternating Gradient design. This technique will be tested in CBETA, which has a single return for the 4-beam energies with strongly-focusing permanent magnets of Halbach type. The high-brightness beam with 150 MeV and up to 40 mA will have applications for Electron Ion Colliders (EICs), e.g. for their electron cooling, and for applications in industry, in nuclear physics, and in X-ray science.

Slides WE1A02 [6.367 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)