Paper |
Title |
Page |
MOPO082 |
Commissioning Status of the Linac for the iBNCT Project |
174 |
|
- M. Sato, Z. Fang, M.K. Fukuda, Y. Fukui, K. Futatsukawa, Y. Honda, K. Ikegami, H. Kobayashi, C. Kubota, T. Kurihara, T. Miura, T. Miyajima, F. Naito, K. Nanmo, T. Obina, T. Shibata, T. Sugimura, A. Takagi, E. Takasaki
KEK, Ibaraki, Japan
- K. Hasegawa
JAEA, Ibaraki-ken, Japan
- H. Kumada, Y. Matsumoto, Su. Tanaka
Tsukuba University, Graduate School of Comprehensive Human Sciences, Ibaraki, Japan
- N. Nagura, T. Ohba
Nippon Advanced Technology Co., Ltd., Tokai, Japan
- T. Onishi
Tsukuba University, Ibaraki, Japan
- T. Ouchi, H. Sakurayama
ATOX, Ibaraki, Japan
|
|
|
Boron neutron capture therapy (BNCT) is one of the particle-beam therapies which use secondary products from a neutron capture on boron medicaments implanted into cancer cells. This has been originally studied with neutrons from nuclear reactors, meanwhile, many activities have been recently projected with accelerator-based neutron generation. In the iBNCT (Ibaraki BNCT) project, the accelerator is consisted with a radio frequency quadrupole (RFQ) and an Alvarez type drift-tube linac (DTL). Protons extracted from an ion source are accelerated up to 3 MeV and 8 MeV, respectively, and bombarded onto a beryllium target to generate neutrons. The design of the linac is based on the J-PARC one, but the most significant difference is the higher duty factor to have a sufficient epithermal neutron flux for BNCT. We have started the commissioning from the end of 2016, and the beam current of 1.3 mA with a repetition of 50 Hz has been achieved with an acceptable stability. Further beam commissioning and reinforcement of the vacuum and cooling water system will be performed toward higher beam current. In this contribution, the current status and future prospects of the linac will be presented.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO082
|
|
About • |
paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
MOPO111 |
Development of New LLRF System at the J-PARC Linac |
233 |
|
- K. Futatsukawa, Z. Fang, Y. Fukui
KEK, Ibaraki, Japan
- Y. Sato
Nippon Advanced Technology Co., Ltd., Tokai, Japan
- S. Shinozaki
JAEA/J-PARC, Tokai-mura, Japan
|
|
|
In the J-PARC linac, the LLRF system with the digital feedback (DFB) and the digital feedforward (DFF) was adopted for satisfying requirement of amplitude and phase stabilities. It has been operated without serious problems. However, it has been used since the beginning of the J-PARC and more than ten years have already passed since the development. The increase of the failure frequency for this system is expected. Additionally, it is difficult to maintain it for some discontinued boards of DFB and DFF and the older developing environment of software. Therefore, we are starting to study the new LLRF system of the next generation. In the present, we are exploring several possibilities of a new way and investigating each advantage and disadvantage. The project and the status of the development for the new system in the J-PARC linac LLRF are introduced.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO111
|
|
About • |
paper received ※ 22 September 2018 paper accepted ※ 09 November 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPO010 |
Muon Acceleration Test with the RFQ Towards the Development of the Muon Linac |
342 |
SPWR015 |
|
|
- R. Kitamura
University of Tokyo, Tokyo, Japan
- S. Bae, S. Choi, B. Kim
SNU, Seoul, Republic of Korea
- Y. Fukao, K. Futatsukawa, N. Kawamura, T. Mibe, Y. Miyake, T. Yamazaki
KEK, Ibaraki, Japan
- K. Hasegawa, Y. Kondo, T. Morishita
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
- T. Iijima, Y. Sue
Nagoya University, Graduate School of Science, Chikusa-ku, Nagoya, Japan
- H. Iinuma, Y. Nakazawa
Ibaraki University, Ibaraki, Japan
- K. Ishida
RIKEN Nishina Center, Wako, Japan
- S. Li
The University of Tokyo, Graduate School of Science, Tokyo, Japan
- M. Otani, N. Saito
J-PARC, KEK & JAEA, Ibaraki-ken, Japan
- G.P. Razuvaev
Budker INP & NSU, Novosibirsk, Russia
|
|
|
The muon linac to accelerate muons 212 MeV is planned in order to measure the muon dipole moments precisely in the J-PARC. The muon acceleration with a RF accelerator hasn’t been demonstrated yet in the world. Therefore the muon acceleration test with the RFQ as the feasibility test of the muon linac was demonstrated at the Muon D line in the J-PARC MLF. Conventional muons are cooled with producing ultra-slow muons using the muonium production and the ionization laser for the muon linac. However these apparatuses couldn’t be used because of the limitation of the experimental area in the acceleration test. Therefore the conventional muon was converted to the negative muonium ion (Mu-) with less than 2 keV using the thin aluminum foil target as the easy cooling method. The Mu- was finally accelerated to 90 keV using the RFQ. The accelerated Mu- was selected with a diagnostic beam line and identified with the Time-Of-Flight measurement using a MCP detector. The result of the world’s first muon acceleration test with the RFQ will be reported in this presentation.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO010
|
|
About • |
paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|