Paper |
Title |
Page |
THPO062 |
IFMIF/EVEDA RFQ Preliminary Beam Characterization |
834 |
|
- E. Fagotti, L. Antoniazzi, L. Bellan, M. Comunian, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
- T. Akagi, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
- P. Cara
IFMIF/EVEDA, Rokkasho, Japan
- H. Dzitko, I.M. Moya
F4E, Germany
- R. Heidinger, A. Marqueta
Fusion for Energy, Garching, Germany
- I. Podadera
CIEMAT, Madrid, Spain
|
|
|
The IFMIF/EVEDA RFQ is the longest and powerful operated. Therefore, it requires a careful characterization from several aspects: beam dynamics, RF, mechanics, installation and commissioning. Due to the very large power handling, the preliminary beam operation was decided to be performed with a low proton beam current at one half of the voltage needed for deuteron accelera-tion, i.e. from 8 mA to 30 mA at 2.5 MeV in pulsed mode, with respect to the nominal 130-mA deuteron beam at 5 MeV in CW. In this framework, it will be presented the characterization of the RFQ in terms of simulation and measurements.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-THPO062
|
|
About • |
paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TU2A04 |
Progress Report on LIPAC |
308 |
|
- M. Sugimoto, T. Akagi, T. Ebisawa, Y. Hirata, R. Ichimiya, A. Kasugai, K. Kondo, S. Maebara, K. Sakamoto, T. Shinya
QST, Aomori, Japan
- P. Abbon, N. Bazin, B. Bolzon, N. Chauvin, S. Chel, R. Gobin, J. Marroncle, B. Renard
CEA/IRFU, Gif-sur-Yvette, France
- L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, E. Fagotti, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
- P.-Y. Beauvais, H. Dzitko, D. Gex, R. Heidinger, A. Jokinen, I. Moya, G. Phillips
Fusion for Energy, Garching, Germany
- P. Cara
IFMIF/EVEDA, Rokkasho, Japan
- D. Gavela, D. Jiménez-Rey, I. Kirpitchev, J. Mollá, P. Méndez, I. Podadera, D. Regidor, R. Varela, M. Weber
CIEMAT, Madrid, Spain
- J. Knaster
F4E, Barcelona, Spain
- G. Pruneri
Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy
|
|
|
International Fusion Materials Irradiation Facility (IFMIF) is the neutron source for simulating fusion reactor environment using two 40 MeV/125 mA CW D+ beams. LIPAc facility is under construction in Rokkasho for validating 9 MeV/125 mA CW linac technology as a prototype of the IFMIF accelerator. Commissioning of 5 MeV CW RFQ is underway after the completion of installation of RFQ, MEBT, diagnostic plate. low power beam dump, RF power system and their auxiliaries. As the first step, high power RF conditioning is planned to complete in early 2018 and beam commissioning will start with stepwise approach at the same time. The status of LIPAc construction for preparing 9 MeV acceleration and results of RFQ beam commissioning are presented.
|
|
|
Slides TU2A04 [9.651 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-LINAC2018-TU2A04
|
|
About • |
paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|