LINAC2018 - List of Authors (Cenni, E.)

Paper	Title	Page
THPO097	Recent Results for Study of Ceramic and Copper Plating for Power Couplers	905
	Y. Yamamoto, E. Kako, S. Michizono KEK, Ibaraki, Japan E. Cenni CEA/IRFU, Gif-sur-Yvette, France A. Four CEA/DRF/IRFU, Gif-sur-Yvette, France Y. Okii Nomura Plating Co, Ltd., Osaka, Japan
	KEK has conducted a survey to select an optimum ceramic after withdrawal by a domestic manufacturing company two years ago. For this selection, there are four important items on the properties of ceramic; that is, relative permittivity, dielectric loss tangent, surface and volume resistance, and secondary electron emission coefficient. For measurements of these parameters, five kinds of ceramic samples supplied from three companies were measured using three kinds of measurement systems. For measurement of secondary electron emission, scanning electron microscope (SEM) with beam blanking system was used. On the other hand, residual resistivity ratio (RRR) for copper plating, which is the most important item for quality control, has also been carried out while changing plating thickness and acid temperature. In this report, the recent results for these studies will be presented in detailed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO097
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recent Results for Study of Ceramic and Copper Plating for Power Couplers

905

Y. Yamamoto, E. Kako, S. Michizono
KEK, Ibaraki, Japan
E. Cenni
CEA/IRFU, Gif-sur-Yvette, France
A. Four
CEA/DRF/IRFU, Gif-sur-Yvette, France
Y. Okii
Nomura Plating Co, Ltd., Osaka, Japan

KEK has conducted a survey to select an optimum ceramic after withdrawal by a domestic manufacturing company two years ago. For this selection, there are four important items on the properties of ceramic; that is, relative permittivity, dielectric loss tangent, surface and volume resistance, and secondary electron emission coefficient. For measurements of these parameters, five kinds of ceramic samples supplied from three companies were measured using three kinds of measurement systems. For measurement of secondary electron emission, scanning electron microscope (SEM) with beam blanking system was used. On the other hand, residual resistivity ratio (RRR) for copper plating, which is the most important item for quality control, has also been carried out while changing plating thickness and acid temperature. In this report, the recent results for these studies will be presented in detailed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO097

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)