JACoW logo

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.


RIS citation export for MOPO093: A Study of a Cooling Configuration for an OFHC Copper Rebuncher

TY  - CONF
AU  - Mazor, O.
AU  - Bukai, M.
AU  - Dyunin, E.
AU  - Nusbaum, D.
AU  - Rodnizki, J.
AU  - Ziskind, G.
ED  - Pei, Guoxi
ED  - Schaa, Volker RW
ED  - Chin, Yong Ho
ED  - Fu, Shinian
ED  - Zhao, Ning
TI  - A Study of a Cooling Configuration for an OFHC Copper Rebuncher
J2  - Proc. of LINAC2018, Beijing, China, 16-21 September 2018
CY  - Beijing, China
T2  - Linear Accelerator Conference
T3  - 29
LA  - english
AB  - A four gap OFHC copper rebuncher is developed at SNRC as a research study and a risk reduction for the MEBT of SARAF Phase II proton/ deuteron linac. The rebuncher is designed to bunch a 5 mA CW beam at 176 MHz. The required cavity voltage according to beam dynamics evaluation is 150 kV with a beam aperture diameter of 40 mm at a beam energy of 1.3 MeV/u with a Q value of 8000. Considering utilizing this cavity for enhancing the beam energy, the cooling configuration is explored for a cavity voltage of 300 kV, consuming 20 kW dissipated power, at a peak electric field of 16 MV/m, equivalent to the Kilpatrick limit. The electro magnetic study conducted with the CST RF simulation package was reproduced at ANSYS HFSS. The simulated dissipated power along the rebuncher for 20 kW forward power injected through the coupler port with the HFSS driven model were assigned to the ANSYS Fluent model to explore the resulted temperature map. Several evolved cooling configurations were studied, including cooling of the drift tubes. In this configuration the temperature rise along the cavity is in the range of 30 K. A detailed design of the four gap rebuncher is following this study.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 200
EP  - 203
KW  - cavity
KW  - simulation
KW  - linac
KW  - pick-up
KW  - vacuum
DA  - 2019/01
PY  - 2019
SN  - 2226-0366
SN  - 978-3-95450-194-6
DO  - DOI: 10.18429/JACoW-LINAC2018-MOPO093
UR  - http://jacow.org/linac2018/papers/mopo093.pdf
ER  -