The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
@inproceedings{vannozzi:ipac2021-tupab366,
author = {A. Vannozzi and D. Alesini and A. Giribono and C. Vaccarezza},
title = {{Design and Realization of New Solenoids for High Brightness Electron Beam Injectors}},
booktitle = {Proc. IPAC'21},
pages = {2374--2377},
eid = {TUPAB366},
language = {english},
keywords = {solenoid, gun, electron, cathode, simulation},
venue = {Campinas, SP, Brazil},
series = {International Particle Accelerator Conference},
number = {12},
publisher = {JACoW Publishing, Geneva, Switzerland},
month = {08},
year = {2021},
issn = {2673-5490},
isbn = {978-3-95450-214-1},
doi = {10.18429/JACoW-IPAC2021-TUPAB366},
url = {https://jacow.org/ipac2021/papers/tupab366.pdf},
note = {https://doi.org/10.18429/JACoW-IPAC2021-TUPAB366},
abstract = {{High-brightness, high-current electron beams are the main requirement for fourth generation light sources such as free-electron lasers (FELs), energy recovery Linacs (ERLs) and high-energy linear colliders. The most successful device for producing such beams is the Radio-Frequency photoinjector where a key element is the gun solenoid. Its main task is to limit the beam emittance growth in the first acceleration stages by imposing a spiraling motion to the beam. This paper is focused on two magnets: the first one is the solenoid gun for the new photoinjector at INFN-LNF SPARC_LAB test facility. The design, the realization, and all the measurements performed at the factory and at LNF are shown. Moreover, the design of a solenoid for a novel C-band gun for CompactLight project is presented. Both magnets have been designed with the goal to reach the same integrated field of the gun solenoid currently installed at SPARC_LAB, with an integrated field quality of 5·10⁻⁴ in a good field radius of 30mm and 10mm radius respectively for SPARC_LAB and CompactLight solenoid. This one is equipped with a bucking coil to limit the field on cathode that could led to an undesired emittance growth.}},
}