IPAC2019 - Classification: MC1: Circular and Linear Colliders / T19 Collimation

Paper	Title	Page
MOPRB024	Beam-Gas and Beam-Thermal Photon Scattering in CEPC	626
	S. Bai, J. Gao, H. Geng, D. Wang, Y. Wang, C.H. Yu, Y. Zhang IHEP, Beijing, People’s Republic of China Y. Zhang University of Chinese Academy of Sciences, Beijing, People’s Republic of China
	The Circular Electron Positron Collider (CEPC) is a proposed Higgs factory with center of mass energy of 240 GeV to measure the properties of Higgs boson and test the standard model accurately. Beam loss background in detectors is an important topic at CEPC. Beam-Gas scattering (BG) and Beam-Thermal photon scattering (BTH), although not so serious as Radiative Bhabha scattering (RBB) and Beamstrahlung (BS), are also important components of the beam induced backgrounds at CEPC due to the beam lifetime. In this paper, we evaluated the beam-gas and beam-thermal photon scattering in simulation and designed collimators to suppress the radiation level on the machine and the detector.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB024
About •	paper received ※ 28 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB048	Collimation System Studies for the FCC-hh	669
	R. Bruce, A. Abramov, A. Bertarelli, M.I. Besana, F. Carra, F. Cerutti, M. Fiascaris, G. Gobbi, A.M. Krainer, A. Lechner, A. Mereghetti, D. Mirarchi, J. Molson, M. Pasquali, S. Redaelli, D. Schulte, E. Skordis, M. Varasteh Anvar CERN, Geneva, Switzerland A. Abramov JAI, Egham, Surrey, United Kingdom A. Faus-Golfe LAL, Orsay, France M. Serluca IN2P3-LAPP, Annecy-le-Vieux, France
	The Future Circular Collider (FCC-hh) is being designed as a 100 km ring that should collide 50 TeV proton beams. At 8.3 GJ, its stored beam energy will be a factor 28 higher than what has been achieved in the Large Hadron Collider, which has the highest stored beam energy among the colliders built so far. This puts unprecedented demands on the control of beam losses and collimation, since even a tiny beam loss risks quenching superconducting magnets. We present in this article the design of the FCC-hh collimation system and study the beam cleaning through simulations of tracking, energy deposition, and thermo-mechanical response. We investigate the collimation performance for design beam loss scenarios and potential bottlenecks are highlighted.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB048
About •	paper received ※ 18 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB049	Study of Beam-Gas Interactions at the LHC for the Physics Beyond Colliders Fixed-Target Study	673
	C. Boscolo Meneguolo, R. Bruce, F. Cerutti, M. Ferro-Luzzi, M. Giovannozzi, A. Mereghetti, J. Molson, S. Redaelli CERN, Geneva, Switzerland A. Abramov JAI, Egham, Surrey, United Kingdom
	Among several working groups formed in the framework of Physics Beyond Colliders study, launched at CERN in September 2016, there is one investigating specific fixed-target experiment proposals. Of particular interest is the study of high-density unpolarized or polarized gas target to be installed in the LHCb detector, using storage cells to enhance the target density. This work studies the impact of the interactions of 7 TeV proton beams with such gas targets on the LHC machine in terms of particle losses.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB049
About •	paper received ※ 17 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB051	Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3	681
	A. Mereghetti, R. Bruce, N. Fuster-Martínez, D. Mirarchi, S. Redaelli CERN, Geneva, Switzerland
	In the framework of the High-Luminosity Large Hadron Collider project (HL-LHC), the LHC collimation system needs important upgrades to cope with the foreseen brighter beams. New collimation hardware will be installed in two phases, the first one during the LHC second Long Shutdown (LS2), in 2019-20, followed by a second phase starting in 2024 (LS3). This paper reviews the collimation upgrade plans for LS2, focused on a first impedance reduction of the system, through the installation of collimators based on new materials, and the improvement of collimation cleaning, achieved by adding new collimators in the cold dispersion suppressor regions. The performance of the new system in terms of cleaning inefficiency for proton and lead ion beams is presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB051
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB064	Precision Modelling of Energy Deposition in the LHC using BDSIM	723
SUSPFO121	use link to see paper's listing under its alternate paper code
	S.D. Walker, A. Abramov, S.T. Boogert, S.M. Gibson, L.J. Nevay, H. Pikhartova JAI, Egham, Surrey, United Kingdom
	A detailed model of the Large Hadron Collider (LHC) has been built using Beam Delivery Simulation (BDSIM) for studying beam loss patterns and is presented and discussed in this paper. BDSIM is a program which builds a Geant4 accelerator model from generic components bridging accelerator tracking routines and particle physics to seamlessly simulate the traversal of particles and any subsequent energy deposition in particle accelerators. The LHC model described here has been further refined with additional features to improve the accuracy of the model, including specific component geometries, tunnel geometry, and more. BDSIM has been extended so that more meaningful comparisons with other simulations and data can be made. Firstly, BDSIM can now record losses in the same way that SixTrack does: when a primary exceeds the limits of the aperture it is recorded as a loss. Secondly, by placing beam loss monitors (BLMs) within the BDSIM model and recording the simulated dose and energy deposition, it can be directly compared with real BLM data. These results are presented here and compared with SixTrack and BLM data from a typical fill in 2018.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB064
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam-Gas and Beam-Thermal Photon Scattering in CEPC

626

S. Bai, J. Gao, H. Geng, D. Wang, Y. Wang, C.H. Yu, Y. Zhang
IHEP, Beijing, People’s Republic of China
Y. Zhang
University of Chinese Academy of Sciences, Beijing, People’s Republic of China

The Circular Electron Positron Collider (CEPC) is a proposed Higgs factory with center of mass energy of 240 GeV to measure the properties of Higgs boson and test the standard model accurately. Beam loss background in detectors is an important topic at CEPC. Beam-Gas scattering (BG) and Beam-Thermal photon scattering (BTH), although not so serious as Radiative Bhabha scattering (RBB) and Beamstrahlung (BS), are also important components of the beam induced backgrounds at CEPC due to the beam lifetime. In this paper, we evaluated the beam-gas and beam-thermal photon scattering in simulation and designed collimators to suppress the radiation level on the machine and the detector.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB024

About •

paper received ※ 28 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB048

Collimation System Studies for the FCC-hh

669

R. Bruce, A. Abramov, A. Bertarelli, M.I. Besana, F. Carra, F. Cerutti, M. Fiascaris, G. Gobbi, A.M. Krainer, A. Lechner, A. Mereghetti, D. Mirarchi, J. Molson, M. Pasquali, S. Redaelli, D. Schulte, E. Skordis, M. Varasteh Anvar
CERN, Geneva, Switzerland
A. Abramov
JAI, Egham, Surrey, United Kingdom
A. Faus-Golfe
LAL, Orsay, France
M. Serluca
IN2P3-LAPP, Annecy-le-Vieux, France

The Future Circular Collider (FCC-hh) is being designed as a 100 km ring that should collide 50 TeV proton beams. At 8.3 GJ, its stored beam energy will be a factor 28 higher than what has been achieved in the Large Hadron Collider, which has the highest stored beam energy among the colliders built so far. This puts unprecedented demands on the control of beam losses and collimation, since even a tiny beam loss risks quenching superconducting magnets. We present in this article the design of the FCC-hh collimation system and study the beam cleaning through simulations of tracking, energy deposition, and thermo-mechanical response. We investigate the collimation performance for design beam loss scenarios and potential bottlenecks are highlighted.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB048

About •

paper received ※ 18 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB049

Study of Beam-Gas Interactions at the LHC for the Physics Beyond Colliders Fixed-Target Study

673

C. Boscolo Meneguolo, R. Bruce, F. Cerutti, M. Ferro-Luzzi, M. Giovannozzi, A. Mereghetti, J. Molson, S. Redaelli
CERN, Geneva, Switzerland
A. Abramov
JAI, Egham, Surrey, United Kingdom

Among several working groups formed in the framework of Physics Beyond Colliders study, launched at CERN in September 2016, there is one investigating specific fixed-target experiment proposals. Of particular interest is the study of high-density unpolarized or polarized gas target to be installed in the LHCb detector, using storage cells to enhance the target density. This work studies the impact of the interactions of 7 TeV proton beams with such gas targets on the LHC machine in terms of particle losses.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB049

About •

paper received ※ 17 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB051

Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3

681

A. Mereghetti, R. Bruce, N. Fuster-Martínez, D. Mirarchi, S. Redaelli
CERN, Geneva, Switzerland

In the framework of the High-Luminosity Large Hadron Collider project (HL-LHC), the LHC collimation system needs important upgrades to cope with the foreseen brighter beams. New collimation hardware will be installed in two phases, the first one during the LHC second Long Shutdown (LS2), in 2019-20, followed by a second phase starting in 2024 (LS3). This paper reviews the collimation upgrade plans for LS2, focused on a first impedance reduction of the system, through the installation of collimators based on new materials, and the improvement of collimation cleaning, achieved by adding new collimators in the cold dispersion suppressor regions. The performance of the new system in terms of cleaning inefficiency for proton and lead ion beams is presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB051

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB064

Precision Modelling of Energy Deposition in the LHC using BDSIM

723

SUSPFO121

use link to see paper's listing under its alternate paper code

S.D. Walker, A. Abramov, S.T. Boogert, S.M. Gibson, L.J. Nevay, H. Pikhartova
JAI, Egham, Surrey, United Kingdom

A detailed model of the Large Hadron Collider (LHC) has been built using Beam Delivery Simulation (BDSIM) for studying beam loss patterns and is presented and discussed in this paper. BDSIM is a program which builds a Geant4 accelerator model from generic components bridging accelerator tracking routines and particle physics to seamlessly simulate the traversal of particles and any subsequent energy deposition in particle accelerators. The LHC model described here has been further refined with additional features to improve the accuracy of the model, including specific component geometries, tunnel geometry, and more. BDSIM has been extended so that more meaningful comparisons with other simulations and data can be made. Firstly, BDSIM can now record losses in the same way that SixTrack does: when a primary exceeds the limits of the aperture it is recorded as a loss. Secondly, by placing beam loss monitors (BLMs) within the BDSIM model and recording the simulated dose and energy deposition, it can be directly compared with real BLM data. These results are presented here and compared with SixTrack and BLM data from a typical fill in 2018.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB064

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)